Operating instructions

Page 6
TIMER OPERATION
The power can be turned on automatically at a preset time so that you can wake up and listen to the
CD or RADIO. Make sure the clock is correct before TIMER PLAY. Please refer to CLOCK setting
procedure.
Note:
1. If you want to exit snooze mode, press POWER button to turn on the system.
2. Unless you cancel it, the “PRESET TIMER” function will be active everyday at the same preset time.
To cancel the “PRESET TIMER” function, press and hold TIMER button for about 3 seconds until the
“TIMER” indicator disappears from the display.
SLEEP SETTING
1. Press the SLEEP/TIMER button while the
power is on. “SLEEP 90” lights in the display.
Note: SLEEP can be adjusted in CD, TUNER,
and AUX modes.
2. Press the SLEEP/TIMER button repeatedly
to select the length of remaining time until the
unit turns off.
It changes the indicator in the following way:
The sleep timer is set and the word “SLEEP” is
shown on the display.
To cancel the sleep timer, press the SLEEP/
TIMER button until the “SLEEP” disappear from
display.
Note: Press SLEEP/TIMER button to set the sleep timer after 5 seconds. The sleep setting is
automatically turned on.
When the sleep timer is used, the power is automatically turned off after the specified time passes.
1. Press and hold TIMER
button for about 3 seconds
until “TIMER” indicator blinks
on display.
2. While “TIMER” indicator
blinks on display, press and
hold the MEM button for
about 3 seconds until hour
blinks on display.
4. Press the MEM button. The minute will blink.
5. Press the TUNING/SKIP buttons to
set minutes and press the MEM button to
“confirm”. Finally the “TIMER” indicator will
stop blinking after 3 seconds on display.
6. Press the FUNCTION button to select the
desired program source:
CD: Insert a disc.
TUNER: Select a BAND and station.
AUX: To listen to audio signals from
external units.
7. Set volume level and X-Bass, and then press
POWER button to standby mode.
8. When the timer has been set, the system will
turn on automatically and “TIMER” indicator
will blink on the display.
9. If you want to snooze for a few more minutes,
you can press SNOOZE button. The system
will go to standby mode (“SNOOZE” indicator
appear on display) and then turn on again 5
minutes later.
You can repeat this function as many times as
you desire within 60 minutes from the preset
automatically PLAY time.
3. Press the TUNING/
SKIP buttons to set
hour.
SLEEP
OFF
SLEEP 90
SLEEP 10
SLEEP 80
....SLEEP 20