SAFETY DATA SHEET 8750(00) Section 1. Identification Product name Product code Other means of identification : Interior Alkyd Flat Dryfall Brilliant White : 8750(00) : Not available. Product type : Liquid. Relevant identified uses of the substance or mixture and uses advised against Not applicable. Manufacturer : Conco Paints 101 Prospect Avenue N.W. Cleveland, OH 44115 Emergency telephone number of the company : (216) 566-2917 Product Information Telephone Number : Not available.
Section 2. Hazards identification Prevention Response Storage Disposal Supplemental label elements Hazards not otherwise classified : Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Wear eye or face protection. Wear protective clothing. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Section 4. First aid measures Description of necessary first aid measures Eye contact Inhalation Skin contact Ingestion : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention. : Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Section 5. Fire-fighting measures Extinguishing media Suitable extinguishing media : Use dry chemical, CO₂, water spray (fog) or foam. Unsuitable extinguishing media : Do not use water jet. Specific hazards arising from the chemical Hazardous thermal decomposition products Special protective actions for fire-fighters Special protective equipment for fire-fighters : Flammable liquid and vapor.
Section 7. Handling and storage Precautions for safe handling Protective measures : Put on appropriate personal protective equipment (see Section 8). Avoid exposure obtain special instructions before use. Avoid exposure during pregnancy. Do not handle until all safety precautions have been read and understood. Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not swallow. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate.
Section 8. Exposure controls/personal protection Appropriate engineering controls Environmental exposure controls : Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment.
Section 9. Physical and chemical properties Lower and upper explosive (flammable) limits : Lower: 0.9% Upper: 6% Vapor pressure Vapor density Relative density : 0.31 kPa (2.333 mm Hg) [at 20°C] : 1 [Air = 1] : 1.45 Solubility : Not available. Partition coefficient: noctanol/water : Not available. Auto-ignition temperature : Not available. Decomposition temperature : Not available. Viscosity : Kinematic (room temperature): <0.205 cm2/s (<20.5 cSt) Kinematic (40°C (104°F)): <0.205 cm2/s (<20.
Section 11. Toxicological information Skin - Mild irritant Pig - Skin - Mild irritant Rabbit - Skin - Moderate irritant Rabbit - Skin - Moderate irritant Rabbit - milligrams 24 hours 250 microliters 435 milligrams 24 hours 20 milligrams 500 milligrams - Sensitization Not available. Mutagenicity Not available. Carcinogenicity Not available. Classification Product/ingredient name OSHA IARC NTP Titanium Dioxide Toluene - 2B 3 - Reproductive toxicity Not available.
Information on the likely routes of exposure : Not available. Potential acute health effects Eye contact : No known significant effects or critical hazards. Inhalation : No known significant effects or critical hazards. Skin contact : No known significant effects or critical hazards. Ingestion : May be fatal if swallowed and enters airways. Symptoms related to the physical, chemical and toxicological characteristics Eye contact : No specific data.
Section 12. Ecological information Toxicity Product/ingredient name Result Species Exposure Lt.
Section 14. Transport information DOT Classification TDG Classification Mexico Classification IATA IMDG UN number UN1263 UN1263 UN1263 UN1263 UN1263 UN proper shipping name PAINT PAINT PAINT PAINT PAINT Transport hazard class(es) 3 3 3 3 3 Packing group III III III III III Environmental hazards No. No. No. No. No.
Section 15. Regulatory information SARA 313 SARA 313 (40 CFR 372.45) supplier notification can be found on the Environmental Data Sheet. California Prop. 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Section 16. Other information Hazardous Material Information System (U.S.A.) Health * 2 Flammability 3 Physical hazards 0 The customer is responsible for determining the PPE code for this material.
Section 16. Other information or addition of products in proportions not specified by Sherwin-Williams. Regulatory requirements are subject to change and may differ between various locations and jurisdictions. The customer/buyer/user is responsible to ensure that his activities comply with all country, federal, state, provincial or local laws.
