Technical Specifications

ManualsBrandsConco ManualsExterior Contractor PaintPro® 9500 Interior/Exterior Flat Black Acrylic Latex Wall Paint - 5 gal.

1

Interior / Exterior Flat

Acrylic Water Base Paint

Conco 9500 Series Interior/Exterior Flat Acrylic Water Base

Paint is our best quality professional grade paint ideal for

Remodels, Custom Homes and Commercial Re-Paints.

Recommended Uses

 Interior and Exterior

 Remodels

 Custom Homes

 Commercial Re-Paints

 Drywall, Plaster, Masonry

Wood and Metal

 Previously Painted Surfaces

Performance Benefits

 Excellent Hide

 100% Acrylic for Long

Term Durability

 Superior Touch-Up

 Outstanding Scrubbability

 Brush, Roll or Spray

Recommended Systems

New Interior Wallboard / Drywall

1 coat Conco P001 Interior Drywall PVA Primer/Sealer

1 or 2 coats Conco 9500 Series Int/Ext Flat Acrylic

Interior Wood, Interior Plaster and Masonry (allow to cure for 30

days)

1 coat Conco P001 Interior Drywall PVA Primer/Sealer

1 or 2 coats Conco 9500 Series Int/Ext Flat Acrylic

Exterior Wood, Preprimed Fiberboard, Hardboard, Redwood,

Cedar

1 coat Conco P009 Exterior Oil Base Wood Stain Blocking Primer, or

1 coat Conco P007 Int/Ext All Surface Acrylic Stain Blocking Primer

1 or 2 coats Conco 9500 Series Int/Ext Flat Acrylic

Exterior Masonry (allow to cure for 30 days), Metal

1 coat Conco P007 Int/Ext All Surface Acrylic Stain Blocking Primer

1 or 2 coats Conco 9500 Series Int/Ext Flat Acrylic

Aggregate Block

1 coat Conco P9511 Int/Ext Acrylic Latex Block Filler

1 or 2 coats Conco 9500 Series Int/Ext Flat Acrylic

Vinyl Siding, Aluminum Siding

1 or 2 coats Conco 9500 Series Int/Ext Flat Acrylic

Technical Information

Finish: Flat 0 – 5 @ 85°

Colors: Black

Drying Time (@ 77°F, 50% Rel. Humidity)

To Touch: 30 Min – 1 Hour

To Recoat: 4 Hours

Spread Rate: 300 – 400 Sq. Ft. /Gal

(dependant upon surface texture and porosity)

Film Thickness: 4.0 mils wet

1.3 mils dry

Volume Solids: 32% ± 2%

Weight Solids: 43% ± 2%

Weight per Gallon: 9.98 lbs

Vehicle Type: Acrylic

Flash Point: Not Applicable

V.O.C. Level: 90g/L; 0.75 lb/gal

Reduction: Water

Cleanup: Soap and water

Size: Available in Ones

and Fives*

(*5’s by special order only)

Warranty:

If this product, when applied according to label

instructions, fails to perform to your complete

satisfaction, we will either replace an equivalent

quantity of product free of charge or refund the

purchase price, upon presentation of proof of

purchase. This warranty does not include labor or

costs associated with labor for the application of any

product. This warranty gives you specific legal rights,

and you may have other rights, which vary from state

to state.

Revised 04/05

SERIES

9500

Summary of content (2 pages)

PAGE 1
Technical Information SERIES 9500 Interior / Exterior Flat Acrylic Water Base Paint Conco 9500 Series Interior/Exterior Flat Acrylic Water Base Paint is our best quality professional grade paint ideal for Remodels, Custom Homes and Commercial Re-Paints. Interior and Exterior Remodels Custom Homes Commercial Re-Paints Flat 0 – 5 @ 85° Colors: Black Drying Time (@ 77°F, 50% Rel. Humidity) To Touch: 30 Min – 1 Hour To Recoat: 4 Hours Spread Rate: Recommended Uses Finish: 300 – 400 Sq. Ft.
PAGE 2
Surface Preparation WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup.