Technical Specifications

ManualsBrandsConco ManualsExterior Contractor PaintPro® 5500 Elastomeric Stucco & Masonry Interior/Exterior Flat Paint Accent Base - 1 gal.

FEATURES

5500 SERIES

PREMIUM GRADE

INTERIOR/EXTERIOR FLAT

BRIGHT WHITE/PASTEL BASE, DEEP BASE, ACCENT BASE

APPLICATION

TECHNICAL DATA*

RECOMMENDED SYSTEMS

TIPS FOR BETTER PERFORMANCE

Conco® 5500 Series Elastomeric Stucco & Masonry Paint is a premium grade interior/exterior acrylic coating

designed for exterior masonry applications and can be applied to new concrete with a pH level up to 12. This

product offers protection from wind-driven rain up to 98 miles per hour, is flexible and bridges hairline cracks,

while providing a mildew resistant coating.

• Premium grade coating designed for custom homes,

residential re-paints and renovations

• Ideal for painting new or existing concrete, masonry, and

stucco

• Withstands 98 mph wind-driven rain

• Flexible & bridges hairline cracks

• Outstanding alkali resistance

• Provides a mildew resistant coating

• Soap and water cleanup

• Backed by a 100% Satisfaction Assured Warranty

Vehicle: 100% Acrylic

Finish: 0-10 units @ 85˚

Flash Point: N/A

Weight Solids: 63% ± 2%

Volume Solids: 48% ± 2%

Dry Time (@ 77°F and 50% R.H.)

To Touch: 4 Hour

To Recoat: 24 Hours

Weight Per Gallon: 11.5 lb/gal

VOC: <50 g/L – 0.42 lb/gal

as per 40 CFR 59.406

Spread Rate: 100-125 sq.ft. per gallon

(dependent on surface texture and porosity)

Film Thickness: @13.0-16.0 mils wet; 6.0-7.5 mils dry

Sizes: Gallons, Fives

*Technical Data based on Bright White/Pastel base

Do not apply at air, surface or product temperatures below 50°F

or when air or surface temperatures may drop below 50°F within

24 hours.

Spray – Airless

Pressure 2300 psi

Tip .021”

Do not reduce

Brush

Use a quality nylon/polyester brush.

Roller

Use a 1/2”- 1 1/2” nap synthetic roller cover.

Concrete, Masonry, Stucco (7 day old, pH level 12 or below)

1-2 Coat Conco 5500 Elastomeric Stucco & Masonry Paint

• Stir well before using

• If using more than one package of the same color, mix

together before applying to ensure uniform color

• Clean the surface thoroughly

• Sand surface smooth to ensure an even surface

• Patch cracks, crevices and trough-wall openings using a

proper sealant or patch

Summary of content (2 pages)

PAGE 1
5500 SERIES PREMIUM GRADE INTERIOR/EXTERIOR FLAT BRIGHT WHITE/PASTEL BASE, DEEP BASE, ACCENT BASE Conco® 5500 Series Elastomeric Stucco & Masonry Paint is a premium grade interior/exterior acrylic coating designed for exterior masonry applications and can be applied to new concrete with a pH level up to 12. This product offers protection from wind-driven rain up to 98 miles per hour, is flexible and bridges hairline cracks, while providing a mildew resistant coating.
PAGE 2
SURFACE PREPARATION CLEAN UP/DISPOSAL WARNING! Removal of old paint by sanding, scraping or other means my generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup.