Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 1 Table of Contents Important Information............................................................................2 Precautions ............................................................................................3 1. Product Overview ............................................................................4 Getting started..................................................................................5 Minimum System Requirements .........
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 2 IMPORTANT INFORMATION FCC Statement This device complies with part 15 the FCC Rules. Operation is subject to the following two conditions: (i) This device may not cause harmful interference, and (ii) this device must accept any interference received, including interference that may cause undesired operation.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 3 PRECAUTIONS Test Shots Always take a test photograph to check that the camera is functioning normally. The liability for any incidental losses (such as the cost of photography or the loss of income from photography) incurred as a result of fault with this product cannot be accepted.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 4 1. Product overview FRONT 1 2 1. Shutter Button 3. USB plug-in CAMERA DIGITAL 2. Viewfinder 4. Lens 3 4 BACK 5 5. Viewfinder 6 6. Battery Compartment 7. LCD display 7 8.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 5 Getting started Congratulations on your purchase of the Concord Eye-Q Mini digital camera. This camera features 8 MB of internal SD RAM memory allowing you to store still images or short video clips in the camera. Please read this manual before operating the camera to become more familiar with the features of this versatile digital camera.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 6 Important battery information The Eye-Q Mini camera uses a type of memory that continually draws power to retain the pictures in the camera’s internal memory even if the camera is powered off. If the battery power is depleted and you have not transferred your images to the computer, you will lose them. It is strongly recommended that you transfer your images to the computer promptly and then remove the batteries to extend their life.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 7 Turning the camera on and off and learning the LCD display Turning the camera on and off and learning the LCD display Turn the camera on by pressing the Mode button located on the back of the camera. Press the Mode Button to cycle through the various Feature Modes. Still Capture Mode The LCD will display the number of images stored in the camera’s memory. You are ready to take pictures when a number appears in the LCD.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 8 High Resolution Mode Your camera can capture VGA (640 x 480) images. Hr in the LCD represents the high resolution mode Low Resolution Mode VGA images are compressed 4:1 in the low resolution mode which is represented by Lr in the LCD. Memory Full A flashing CF in the LCD indicates that the camera’s internal memory is full.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 9 Selecting the power supply To extend the battery life, remove the batteries from the camera when it is not in use. Remember to transfer your pictures to your computer first or you will lose them. Note: • Do not use different types of batteries together. • Soiling, such as fingerprints on the battery terminals, can significantly reduce the battery life. • Do not use new and used batteries together.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 10 2. Taking Pictures Press the Mode button once to turn the camera on. When a number appears in the LCD you are ready to take pictures by pressing the shutter button. A beeping sound indicates that the image has been captured and the number of pictures taken will be updated in the LCD. You are now ready to take another shot. If CF flashes in the LCD, there is insufficient memory in the camera to take another picture.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 11 Changing the resolution To change the resolution, press the Mode Button until the resolution option is displayed in the LCD. The resolution is noted by HR for high resolution and Lr for Low resolution. When the resolution you would like to select appears in the LCD, press the shutter button to confirm your choice. The camera will then enter the picture taking mode.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 12 Delete Funtion Press the Mode Button until either CA or CL appears in the LCD. • CA stands for clear all and is used to delete all images. • CL stands for clear last and is used to delete the last image. When the mode you want appears in the LCD, press the Shutter button. Depending on your selection, either CA or CL will flash in the LCD. Press the Shutter button again to confirm your selection. The frame counter on the LCD will be updated.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 13 3. Installing the Drivers and Software Before beginning the installation, please note that the camera should not be connected to your PC via the supplied USB cable. Insert the CD into the CD-Rom drive. The Autorun screen will appear. If it does not, click on setup.exe on the CD-ROM. Choose Language Start Installation Exit Setup 1. Select the driver and software to install by clicking on the boxes to the left of the software options. 2.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 14 Transferring pictures to your PC 1. Make sure that your camera is securely connected to your PC. 2. Click on the Presto! ImageFolio Icon. 3. Click on Still Camera for the Camera Type and click the Select Camera folder. 4. Scroll up or down to choose images to download or tick the All Images box if all images are to be downloaded. 5. Click Transfer to download the pictures. Transferring Video Clips 1. 2. 3. 4.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 15 Application Software NewSoft Presto ! Mr. Photo v1.6 Presto! Mr. Photo stores and catalogs all of your valued photos and videos. You can sort them and their film “rolls” by date and title, and search by keyword, date or other im age/video properties. Drag-and drop photos to the Application Bar to create photo masterpieces using ready-made templates.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 16 NewSoft Presto ! Image Folio v4.2 Image Folio is a comprehensive multimedia image-processing program for Windows 95/98/ME/2000/XP or Windows NT 4.0. It enables you to process photographs, graphics, and drawin gs captured from scanners, VCRs, laser discs, digital cameras, video capture boxes, etc. Note: Click “Start” “Program” “Presto! Mr. Photo 1.6” / “Presto! Video Works 4.5” / “Presto! Image Folio 4.2” “Mr.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 17 4. Cleaning and maintenance Be sure to read this information to ensure that you use your camera correctly. Places to Avoid Do not store or use the camera in the following places or locations: • Very humid, dirty or dusty places. • In direct sunlight or in places subject to extreme increases in temperature such as in a closed car during summer. • Extremely cold places. • Places subject to strong vibrations. • Places affected by smoke or steam.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 18 Storing the camera If you do not intend to use the camera for a long period of time, remove the batteries before storing the camera. Cleaning your Camera Use a blower brush to remove dust from the lens and LCD surface and then wipe lightly with a soft, dry cloth. If any soiling remains, apply a small amount of lens cleaning liquid to a piece of lens cleaning paper and wipe gently.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 19 5. Troubleshooting The troubleshooting guide is designed to help you. If problems continue, please contact your local customer support hot-line. For Windows® User: SYMPTOM PROBLEM SOLUTION You have lost power to your CONCORD EYE-Q Mini by All the images I have taken do not either: appear. Insufficient battery power. Upload all images to your PC as soon as possible. Refer to Battery Guidance section in the User’s Manual.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 20 SYMPTOM PROBLEM SOLUTION My CD installation wizard does not work. The auto installation file is switched to off or the CD ROM is not in the drive. Go to the computer desktop. Right click on “My Computer.” Click on “Properties.” Select “Device Manager” and double click on “CD-Rom.” Double click on “CD-R.” Click on “Setting.” Ensure “Auto insert notification” is checked and the “disconnect” is selected.
Mini Inst.Manual(5S1059-01) 24/7/02 6:55 pm Page 21 6. Getting Help If you need help with your camera, refer to the Troubleshooting section of this manual. If you still cannot find the solution, visit our Web site at www.support.concordcam.com. Most support issues are answered in the Frequently Asked Questions (FAQ) section.
Mini Inst.Manual(5S1059-01) 29/7/02 4:58 pm Page 22 7. Warranty Information LIMITED WARRANTY The manufacturer warrants your Concord Eye-Q Mini camera for a period of 1 year from the date of purchase to be free from defects in material and workmanship. The warranty period shall be extended accordingly if applicable mandatory legislation in effect on the date of purchase requires a longer warranty period.
Technical Support Hot Line: Toll Free In the USA & Canada 1-866-522-6372 Toll Free In Europe UK: 0800-169-6482 BELGIUM: 0800-787-57 FRANCE: 0800-917-599 GERMANY: 0800-1800-563 SPAIN: 900-973-195 ITALY: 800-781-883 All Other Countries - Toll 31-53-482-9779
