Instructions / Assembly

10
Your new CONCORD ceiling fan is now ready for use.
Reset your circuit breaker and restore power to the cir-
cuit. See the Operation Instructions below to review the
function of each control on your fan.
The pull chain located on the switch housing (see figure
15) controls the speed of your fan. When the fan is OFF,
pull the chain once for HIGH speed, twice for MEDI-
UM speed, three times for LOW speed and fourth time
to turn it off again.
The slide switch located on the switch housing (see fig-
ure 15) controls the direction of blade rotation. The
LEFT position sets the blades in REVERSE rotation (air
moves UP). The RIGHT position sets the blades in
FORWARD rotation (air moves DOWN).
Operation Instructions
Maintenance
Your fan requires very little maintenance. Cleaning of
the housing should be done with a damp soft cloth (NO
CLEANING AGENTS). On the blades, use a duster or
dry cloth because any moisture could cause the blades
to warp.