Instructions / Assembly

Step 1 Install Mounting Bracket

Ceiling Canopy Mounting Screw

Install the mounting bracket onto the electrical

junction box in the ceiling using two machine

screws, two washers and two lock washers

(see

figure 1)

The mounting bracket has slotted holes to enable

it to move sideways for proper alignment. Make

sure the mounting bracket is centered over the

electrical junction box and that it is securely

attached

(see figure 2).

Loosen the two canopy mounting screws on the

downside face of the mounting bracket. Back

them out about half way. This will allow for easier

installation of the ceiling canopy later

(see figure

Fig. 1

Slotted Holes

Junction Box

NO MOVEMENT SHOULD OCCUR BETWEEN

THE MOUNTING BRACKET AND THE ELEC-

TRICAL JUNCTION BOX.

Pull the electrical wires in the junction box down

and through the mounting bracket.

Mounting

Fig. 2

Fig. 3