Instructions / Assembly

Fig. 9

Fig. 10

Step 6 Light Fixture Installation

Step 7 Installing Glass Shades and Bulbs

Step 8 Final Checks

Each of the above connections

should be made as tight as

possible using the proper size

plastic wire nuts. Plastic elec-

trical tape is not recommended

for these connections.

Screws

Light Fixture

Wire Nuts

Three Speed

Switch (pull chain)

Glass Shades

Thumb Screws

Light Fixture

Switch (pull chain)

Reverse

Switch

Bulbs

Back off (loosen) the three screws on the electrical

housing cover (see figure 9).

Connect White wire to White wire, and Black wire

to Blue wire using quick connectors. Press together

firmly.

Place light fixture onto fan, line up the 2 holes and

rotate light fixture; Insert the screws and tighten.

Place glass shades onto light fixture, Secure with

thumb screws, DO NOT over tighten (see figure

10).

Twist bulbs into socket, DO NOT over tighten.

Check all set screws and connections are properly

in place and tight.

Check blade clearance and rotation.

Attach the decorative pull chain tassel(s) to the

switch housing.