Instructions / Assembly

9
Operation Instructions
Your new CONCORD ceiling fan is now ready for use. Reset your
circuit breaker and restore power to the circuit. See the Operation
Instructions below to review the function of each control on your
fan.
The three speed pull chain located on the switch housing (see
figure 9) controls the speed of your fan. When the fan is OFF, pull
the chain once for HIGH speed, twice for MEDIUM speed, three
times for LOW speed and fourth time to turn it off again.
The light fixture pull chain located on the bottom of the light fix-
ture (see figure 10) controls your light kit in "ON" or "OFF".
The slide switch located on the switch housing (see figure 10) con-
trols the direction of blade rotation. The UP position sets the
blades in REVERSE rotation (air moves UP). The DOWN posi-
tion sets the blades in FORWARD rotation (air moves DOWN).