Instructions / Assembly

12
© Great 2000 Enterprises, Inc., 2005 • ALL RIGHTS RESERVED •
No part of this publication may be produced, transmitted, transcribed, stored in a retrieval system, or translated into any language
in any form by any means without the written permission of Great 2000 Enterprises, Inc..
Concord Fans and Lighting is a division of Great 2000 Enterprises, Inc.
®
Your new CONCORD ceiling fan is now ready for
use. Reset your circuit breaker and restore power to
the circuit. See the Operation Instructions below to
review the function of each control on your fan.
The pull chain located on the switch housing (see fig-
ure 16) controls the speed of your fan. When the fan
is OFF, pull the chain once for HIGH speed, twice
for MEDIUM speed, three times for LOW speed
and fourth time to turn it off again.
The slide switch located on the switch housing (see
figure 16) controls the direction of blade rotation.
The UP position sets the blades in REVERSE rota-
tion (air moves UP). The DOWN position sets the
blades in FORWARD rotation (air moves DOWN).
Operation Instructions
Maintenance
Your fan requires very little maintenance. Cleaning
of the housing should be done with a damp soft
cloth (NO CLEANING AGENTS). On the blades,
use a duster or dry cloth because any moisture could
cause the blades to warp.
Junction Box
Safety
Screw
Lock Washer
Switch Housing
Mounting
Screw
Blade to Arm
Screw
Ceiling Canopy
Support Rod
Canopy
Mounting
Screws
Fan Body
Switch
Housing
Mounting
Plate
Screw
Fan Blade
Set Screw
Forward/Reverse Switch
Blade Arm
Downrod
Coupler
Mounting Bracket
Washer
Speed Switch