Use and Care Manual

Thank you for buying
our rug!
Upon receipt please inspect the outer plastic polybag to rule
out freight damage, please call 212-686-6686 or email
[e-mail] if you think it was.
We do not recommend using a box cutter or scissors to remove
plastic bag as you may damage the rug. If you use them, please
do so carefully.
If you purchased a shag, multi-textured or blended yarn
(olefin, polyester and/or acrylic), the yarn may be pressed from
product being rolled. It may appear much different than the image you saw
online since the pile is pressed and needs to rest in order to open up.
Polyester tends to shine and shag pile may be pressed down and look flat.
Don’t be alarmed, this is all normal! In some cases it may take up to 1-2 weeks
to fully open up. . . to speed up this process you can roll the rug in the
opposite direction as well as reverse rolling it with the pile facing in or out –
depending on how it arrived to you. You can also hand brush the pile to speed
up the opening process and give it a few days to rest to open up on your floor.
Following these steps would significantly reduce the time for yarn to rest so
you can enjoy your luxurious purchase! The images we have online were done
at a photo studio so the appearance of your rug may vary slightly due to your
monitor settings as well as lighting environment whether from natural or
electrical light source(s) which also vary depending on electric light
color/type. PLEASE KEEP IN MIND THAT RUGS HAVE A LIGHT SIDE AND DARK
SIDE, IF YOU ROTATE THE RUG THE COLOR TONE MAY ADJUST AS WELL.
Rug Care and Maintenance:
- Professional Cleaning Recommended
- Rug padding is recommended to protect the surface underneath, prevent
slippage as well as extend the lifecycle of the rug.
- Blot spills and stains immediately, please make sure the rug is not soaked as the
jute incorporated in the backing will absorb liquids and expand creating
irreversible creases. If using professional cleaners, do make them aware.
- Vacuum regularly and if using a beater bar type vacuum, please make sure it’s
on a high elevation setting. Avoid using low height levels that are close to the
surface of the rug especially with shag or multi textured area rugs as yarn may
snag.