Operation Manual

44
En
RESTORING FACTORY DEFAULT SETTINGS
To restore the default settings in your camera:
1. In the Setup Menu, press or until Restore Default is highlighted.
2. Press or to highlight No or Yes, and then press OK to confirm.
• If No is selected, no change is made. The LCD returns to the previous screen.
• If Yes is selected, the LCD shows “Are you sure?”
3. Press or to highlight Yes or No, then press OK.
• If No is selected, no change will be made. The LCD returns Setup page.
• If Yes is selected, the camera will be reset to the factory default setting. The LCD will show “Restoring....”
and then return to setup page. The Default settings will be restored.
The table below lists the default settings:
OPTION DEFAULT STATUS
Camera Mode Single Shot
Image Size 2048 x 1536
Quality Normal
Flash Auto Flash
White Balance AWB
LCD Brightness Center (0)
Scene Selection OFF
Digital Zoom Yes
Exposure Compensation 0
ISO Auto
Metering Matrix
Photo Effect None
Time Out 2 Min
Slide show interval 2 Seconds
Beep On
Quick View 1 Sec
AF Mode Multi-Area
Continuous Repeat Off
AF Assist Light Auto
TV Mode NTSC for USA/Japan, PAL for Europe/Asia
Date/Time Format USA/Japan: MM/DD/YYYY, 12-hour
Europe/Asia: DD/MM/YYYY, 24-hour
RESTORE THE CAMERA TO FACTORY DEFAULT SETTINGS