Operation Manual

INSTALLATION GUIDE

INSTALLING DIRECTX 9– WINDOWS 2000

Step 1 Make sure your camera is powered off and not connected to the computer.

Step 2 Make sure the computer is powered on and Windows 2000 is running.

Step 3 Close any other applications or software you may be running.

Step 4 Insert the CD-ROM included in your camera’s packaging into your computer’s

CD-ROM Drive.

NOTE: If the installer does not start automatically within 30 seconds after the

CD-ROM has been inserted, click on "My Computer" either on the Desktop or in the

Start Menu and locate the CD-ROM Drive. Double click on the CD-ROM Drive icon

for installation. Double-click on the file named Install and proceed to Step 5.

Step 5 The installation screen will appear, click

on Install Microsoft DirectX 9.0

Step 6 The next screen will begin the DirectX

setup. Click [Next >]

Step 7 Click [Next >]

Step 8 Click [Finish]

Your computer will automatically reboot.

Downloaded from www.Manualslib.com manuals search engine