www.concord-camera.com Downloaded from www.Manualslib.
En ENGLISH CONGRATULATIONS Congratulations on the purchase of your new camera. Your camera has been carefully engineered and manufactured to give you dependable operation. Read this manual before operating the camera to become more familiar with it. This manual has been written and formatted with depth and detail so that you can easily follow the instructions to maximize the features of your camera. 1 Downloaded from www.Manualslib.
CAMERA OVERVIEW En CAMERA OVER VIEW Top/Front 1 5 2 6 1. Power Button 2. Shutter Button 3 7 8 7. Red-eye Reduction LED/Self-Timer LED 3. Flash 8. Port Cover 4. Zoom Lens 9. Mini-USB port 5. Viewfinder 10. TV-Out port 6. Flash Sensor 9 10 4 Bottom/Back 11. Flash Ready LED 12. Viewfinder 13. Auto-Focus LED 14. LCD 15. Tripod Socket 21. OK Button 22. Right arrow / Zoom in (T) 23. Down arrow / Flash 24. Wrist Strap Holder 16. Battery/Memory 25. MENU Button Card Door 17. Mode Switch 18.
En TABLE OF CONTENTS CAMERA OVERVIEW ............................................................................................................................................2 Top/Front ........................................................................................................................................................2 Bottom/Back ....................................................................................................................................................
En CUSTOMIZING THE CAMERA SETTINGS ........................................................................................................30 Setup Menu and Features ............................................................................................................................32 Setting the Auto Off Time ..............................................................................................................................33 Setting the Language ...........................................
GETTING STARTED En GETTING STARTED Package Contents • Concord Eye-Q 4360z • Mini-USB Cable • TV Out Cable • Use's Guide/Quick Start Guide/Warranty Card • Camera Case • Wrist Strap • 2 x AA Rechargeable NiMH Batteries and Charger • CD-ROM (for Windows users only) – USB Mass Storage Driver – ArcSoft PhotoImpression 2000 – Adobe Acrobat Reader 5 – Microsoft DirectX 9 – Multilingual User’s Guide A A Camera Features • 4 Megapixels, 2272 x 1704 Resolution • 1.
AWB ⁄ ⁄ GETTING STARTED En TURNING THE CAMERA ON AND OFF The Power Button is located on the top of the camera.(fig.1.1) 1. Press the ( ) Power Button to turn the camera on. • The lens cover will open, and the lens will extend out automatically to the wide-angle position. • The LCD will turn on automatically. 2. To turn the camera off, press the ( ) Power Button. fig.1.
En GETTING STARTED SETTING THE LANGUAGE, DATE AND TIME When the camera is powered on for the first time, the Language, Date and Time menus will appear. LANGUAGE OPTION English Français Español Deutsch Italiano RETURN Setting the Language 1. Turn the camera on. • The Language Setup screen will appear on the LCD. 2. Press to highlight the language you would like to use. 3. Press to select. 4. The next screen will read “Are You Sure?” press to select No or Yes. 5. Press to confirm the selection.
GETTING STARTED A ADJUST TIME ADJUST TIME ADJUST TIME 0 1 : 01 AM 01 : 01 AM 0 1 : 0 2 AM AWB ⁄ ⁄ RETURN OK SET RETURN OK SET RETURN OK SET The time is displayed in hour, minute format. 1. Press to change the selection in the blinking position until you reach the desired setting. 2. Press to highlight the hour (HH), minutes (MM) or AM/PM. • The selection will blink when it is highlighted. 3. Repeat steps 1 and 2 until the time is set. 4. Press to set the time.
En GETTING STARTED INTERNAL MEMORY/INSERTING THE MEMORY CARD Internal Memory The camera is equipped with 16MB of internal memory, which can be used right away. Status Memory in Use Memory card is not inserted. Internal Memory Memory card is inserted. Memory Card NOTE: The files stored in the internal memory will remain in the internal memory until the Transferring Files feature is selected, and the files will be transferred to the memory card.
GETTING STARTED / TAKING A PICTURE A A SETTING THE CAMERA’S OPERATIONAL MODE AWB ⁄ ⁄ ⁄ ⁄ En AWB The camera has 3 operational modes Camera Mode, Review Mode and Video Clip Mode. 1. To change the camera operational mode, slide the mode switch horizontally to the corresponding position. A A A AWB ⁄ AWB ⁄ AWB ⁄ ⁄ ⁄ ⁄ A AWB ⁄ Camera Mode Use the camera mode setting to take pictures or to customize your camera settings for picture taking.
⁄ En TAKING A PICTURE FLASH READY LED ⁄ fig.1.4 fig.1.3 Steady The camera is capturing a picture or video clip. Hold the camera steady to prevent blurry pictures. A A A AWB ⁄ ⁄ ⁄ ⁄ AWB AWB A ⁄ ⁄ ⁄ ⁄ Blinking The flash is recharging. You may move the camera in this mode. AWB Note: Do not power the camera off or switch modes while the camera is capturing or storing a picture or video clip to prevent corrupting the picture or video clip being stored.
AWB AWB A ⁄ ⁄ ⁄ TAKING A PICTURE AWB ⁄ ⁄ This feature can be used to freeze the focus when the subject is not located in the center of the picture. A 4M 28/45 En AUTO-FOCUS LOCK ⁄ A To use the focus lock: 1. Position the subject in the center of the red frame located in the LCD. (fig.1.3) 2. Press the shutter button halfway until the green Auto Focus LED lights up. The Auto Focus (green) LED will display the status of the auto focus lock.(fig.1.4) AWB ⁄ AWB ⁄ 07 ⁄ 04 ⁄ 03 02:40PM fig.
En TAKING A PICTURE AWB SETTING THE FLASH 4M A 28/45 AWB AWB AWB 07 ⁄ 04 ⁄ 03 02:40PM 4M A A ⁄ ⁄ How to set the flash: A A 1. Press the ( ) button repeatedly until the desired indicator appears on the LCD. Flash Mode ⁄ ⁄ A A Auto Flash ⁄ The ⁄ AWB camera judges if a flash is ⁄ ⁄ required. ⁄ dark, ⁄ If the environment is too the flash will fire. A Auto+Red-Eye Reduction Use this mode to significantly reduce the occurrence of “red- eye” in flash photography.
TAKING A PICTURE En TAKING A PICTURE WITH OPTICAL ZOOM The camera can use up to 3x optical zoom to take pictures. The white zoom bar color shown on the LCD indicates the optical zoom only. 4M 4M A 28/45 4M 28/45 A 28/45 ⁄ AWB AWB ⁄ ⁄ ⁄ ⁄ ⁄ How to use optical zoom: A A A 1. Press ( T ) to zoom in. • The zoom bar will display on the LCD screen. 2. Press ( W ) to zoom out or to the normal mode.
En TAKING A PICTURE 1x – 4x Digital Zoom The image increases in size on the LCD. Original Size A 4x Zoom LCD Display 4M 28/45 A 4M Actual Image Recorded 28/45 AWB AWB 07 ⁄ 04 ⁄ 03 02:40PM 07 ⁄ 04 ⁄ 03 02:40PM 6x Digital Zoom The image contained within the blue frame is the image recorded. LCD Display Actual Image Recorded 6x Digital Zoom ⁄ Important: 1. Hold your camera steady while using Digital Zoom to prevent blurriness in the photograph due to camera movement.
TAKING A PICTURE En USING THE MAIN MENU IN CAMERA MODE CAPTURE MODE + + RETURN OK SET Q QUALITY SETUP FINE NORMAL ECONOMY RETURN OK SET IMAGE SIZE CAMERA MODE 4M 3M 2M 1M V CAPTURE MODE Q QUALITY SETUP IMAGE SIZE DIGITAL ZOOM SCENE SELECTION RETURN SELECT DIGITAL ZOOM 2272 x 1704 2048 x 1536 1600 x 1200 1280 x 960 640 x 480 RETURN OK SET ON OFF CAMERA MODE WHITE BALANCE + – EV COMPENSATION SETUP RETURN OK SET SCENE SELECTION RETURN SELECT OFF PARTY INDOOR BEACH SNOW SUNSET NIGHT LANDSCA
En TAKING A PICTURE USING THE MAIN MENU IN CAMERA MODE Follow the steps below to set the advanced shooting options in the camera through the Main Menu. Using the ( ) Main Menu: 1. Turn the camera on. 2. Set the mode switch to ( ). 3. Press the MENU button to display the main menu. 4. Press until the desired option is highlighted. 5. Press to enter the submenu. 6. Press in the submenu to toggle between the options. 7. Press to make a selection. • All selections will be marked by a red check mark.
TAKING A PICTURE AWB A A A 4M En SELF-TIMER 28/45 A A AWB AWB AWB ⁄ ⁄ ⁄ AWB 07 ⁄ 04 ⁄ 03 02:40PM ⁄ ⁄ ⁄ AWB A A How to use the Self-Timer: 1. Slide the Mode Switch to ( ) Camera Mode. 2. Press ( ) to set the Self-Timer. • ( ) will be displayed on the LCD when Self-Timer is set. AWB AWB 3. Place the camera on ⁄a flat surface or tripod. ⁄ ⁄ ⁄ 4. Use the LCD to compose the picture, and then press the Shutter button to activate the Self-Timer. The Self-Timer LED will blink for 10 seconds.
En TAKING A PICTURE CONTINUOUS SHOOTING This feature enables the camera to capture a continuous series of pictures while the shutter button is pressed down. CAPTUREAMODE CAMERA MODE CAPTURE MODE Q QUALITY SETUP IMAGE SIZE A 4M 28/45 A + DIGITAL ZOOM SCENE SELECTION RETURN SELECT + AWB AWB AWB RETURN ⁄ OK ⁄ SET 07 ⁄ 04 ⁄ 03 02:40PM ⁄ Using Continuous shooting: 1. In the ( ) Main Menu, press to enter the Capture Mode submenu. 2.
A A A A TAKING A PICTURE AWB AWB AWB AWB AWB The Image Quality setting determines the amount of compression used to reduce the size ⁄ of⁄ the stored image ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ file in order to economize the space in the memory card.
En TAKING A PICTURE EV COMPENSATION AWB The camera uses EV Compensation to give you well exposed pictures under most conditions. If the main subject turned out too light or too dark, you can use the EV Compensation feature to improve the result.
TAKING A PICTURE En SCENE SELECTION The default options in the camera can be used in most settings. The scene modes are helpful to quickly AWB optimize the various settings to best capture specific scenes.
A A En TAKING VIDEO CLIPS AWB ⁄ TAKING VIDEO CLIPS A A The camera can capture video clips without sound. AWB ⁄ AWB ⁄ ⁄ ⁄ ⁄ AWB ⁄ ⁄ ⁄ ⁄ 28 SEC Press Shutter to Record A 07 ⁄ 04 ⁄ 2003 02:40 28/45 A AWB ⁄ ⁄ To record a video clip: 1. Slide the Mode Switch to ( ) Video Clip Mode. • The time limit is showing on the upper right corner of the screen. 2. Position the subject in the LCD. 3. Press the shutter button half-way to activate the focus until the green AF LED stops blinking. 4.
REVIEWING YOUR FILES REVIEWING VIDEO CLIPS How to review a video clip: 1. In ( ) Review Mode, press and to scroll through the stored pictures A and video clips. • Only the first image of the video clip is shown. 2. When a video clip ( AVI ) is displayed on the LCD, press to play.
En REVIEWING YOUR FILES USING THE REVIEW MENU DELETE ALL DELETE FILE YES NO DELETE ALL REVIEW DELETE FILE THUMBNAIL SLIDE SHOW FILE TRANSFER SETUP RETURN SELECT RETURN SELECT RETURN OK SET Are You Sure? No Yes OK SELECT 0012/0012 SLIDE SHOW T START SHOW INTERVAL RETURN SELECT Transfer all files from internal memory to memory card? No Yes OK SELECT Using the Review Menu in ( ) Review mode: 1. Turn the camera on. 2. Set the Mode Switch to ( ). 3.
⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ REVIEWING YOUR FILES A A ⁄ En DELETING YOUR FILES Delete One AWB AWB ! Once a file is deleted, it cannot be 4M 28 SEC 28 SEC ⁄ ⁄ recovered. ⁄ ⁄ 0001/0003 JPEG Are You Sure? ⁄ No Yes ⁄ ⁄ 2003:08:30 MENU 13:30:41 OK SELECT DELETE OK 1. Slide the Mode Switch to ( ) Review Mode. 2. Press ( ) to enter the delete one file mode. 3. The next screen will display the stored pictures and video clips as thumbnails. Press , , , to highlight the file you want to delete. 4.
En REVIEWING YOUR FILES AWB ⁄ USING THUMBNAIL MODE 4M 28 SEC ⁄ REVIEW 0001/0003 DELETE FILE THUMBNAIL SLIDE SHOW FILE TRANSFER SETUP RETURN SELECT JPEG 2003:08:30 13:30:41 0012/0012 How to view your files: 1. When the thumbnail menu is highlighted in the ( ) Review Mode, press to have nine thumbnail images or video clips appear at once on the LCD display. 2. Press to highlight a picture or video clip. • When is pressed up in the top row of thumbnails, the previous 9 files will be displayed.
AWB ⁄ ⁄ REVIEWING YOUR FILES A A A A Use the slide show feature to automatically display your pictures and video clips on the camera LCD screen at a selectable interval rate. You can also run a slide show on any video device that is equipped with a video AWB AWB AWBa television, computer monitor, AWBor digital projector. input, such as ⁄ AWB ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ The slide show feature is available when you have at least one picture stored.
A A En REVIEWING YOUR FILES TRANSFERRING FILES FROM THE INTERNAL MEMORY TO THE MEMORY CARD AWB AWB AWB The camera allows⁄ you to transfer photos and video clips that are stored in the camera's internal memory to a ⁄ ⁄ ⁄ ⁄ ⁄ SD memory card. 4M A 284SEC M ⁄ A 4M A AWB 2003:08:30 ⁄ ⁄ REVIEW A 0001/0003 A DELETE FILE THUMBNAIL SLIDE SHOW FILE TRANSFER SETUP AWB AWB RETURN ⁄ SELECT ⁄ JPEG 13:30:41 ⁄ Transfer all files from internal memory to memory card? No Yes OK SELECT ⁄ ⁄ 1. 2. 3. 4.
CUSTOMIZING THE CAMERA SETTINGS En CUSTOMIZING THE CAMERA SETTINGS T SET AUTO OFF TIME 2 MIN 3 MIN RETURN OK SET TV OPTION NTSC PAL N P SETUP T CAMERA MODE WHITE BALANCE + – EV COMPENSATION SETUP SETUP 1 12 24 D RETURN SELECT SET AUTO OFF TIME TV OPTION LANGUAGE OPTION RESTORE DEFAULT LCD BRIGHTNESS RETURN SELECT M FORMAT ADJUST DATE ADJUST TIME TIME FORMAT DATE FORMAT RETURN SELECT OK SET LANGUAGE OPTION English Français Español Deutsch Italiano RETURN OK SET LANGUAGE OPTION Nederlan
En CUSTOMIZING THE CAMERA SETTINGS CUSTOMIZING THE CAMERA SETTINGS ADJUST DATE 1 01 ⁄ 01 ⁄ 2003 MM ⁄ DD ⁄ YYYY RETURN OK SET ADJUST TIME SETUP 0 1 :0 1 AM SET AUTO OFF TIME TV OPTION LANGUAGE OPTION RESTORE DEFAULT LCD BRIGHTNESS RETURN SELECT CAMERA MODE WHITE BALANCE + – EV COMPENSATION SETUP 1 D SELECT 12 24 OK SET TIME FORMAT 12-HOUR 24-HOUR SETUP 12 24 RETURN RETURN M FORMAT ADJUST DATE ADJUST TIME TIME FORMAT DATE FORMAT RETURN SELECT SETUP D M OK SET DATE FORMAT DD ⁄ MM
Using the Setup menu: 1. Turn the camera on. 2. Set the mode switch to ( ) or ( ). 3. Press the MENU button to display the main menu. 4. Press until Setup is highlighted. 5. Press to enter the Setup submenu. 6. In the Setup menu, press to highlight the option you wish to customize. 7. Press to enter the submenu of the highlighted option. 8. Use the arrow buttons to adjust the setting and press to select. • The camera will beep when you press for feature selection if sound is on. 9.
En CUSTOMIZING THE CAMERA SETTINGS CUST OMIZING THE CAMERA SETTINGS SETTING THE AUTO OFF TIME CAMERA MODE + – WHITE BALANCE EV COMPENSATION SETUP RETURN SELECT SETUP T T SET AUTO OFF TIME TV OPTION LANGUAGE OPTION RESTORE DEFAULT LCD BRIGHTNESS RETURN SELECT T T SET AUTO OFF TIME 2 min 3 min 60 SEC RETURN OK SET Notes: • The LCD will automatically turn off after 1 minute of inactivity (cannot be changed) and the camera will turn off after 2 minutes of inactivity to conserve battery power.
CUSTOMIZING THE CAMERA SETTINGS 1. In the Setup menu, press until Adjust Time is highlighted. 2. Press to enter the options. 3. Press to highlight the hour (HH), minutes (MM) or AM/PM. • The selection will blink when it is highlighted. 4. Press to change the data in the blinking position until you reach the desired setting then press . ADJUST TIME 01 : 01 AM RETURN OK SET Note: • The time can be displayed in a 12-hour or 24-hour format. Please go to page 31 to change this setting.
En CUSTOMIZING THE CAMERA SETTINGS FORMATTING THE INTERNAL MEMORY OR THE MEMORY CARD CAUTION: 1. Formatting deletes all pictures and video clips from the memory. 2. Removing the card during formatting may damage the card. 3. Selecting the formatting feature while there is no memory card in the camera, will cause the internal memory to format. All pictures and video clips on the internal memory will be lost. ! SETUP CAMERA MODE WHITE BALANCE + EV COMPENSATION – SETUP 1 12 24 D RETURN 1. 2. 3. 4.
REST ORE THE CAMERA T O FACT ORY DEFAULT SETTINGS To restore the default settings in your camera: 1. Press when Restore Default is highlighted in the camera. 2. Press to select No or Yes. • When No is selected, no change is made. • When Yes is selected, the Default settings will be restored. Please refer to the table below for the default settings.
En SOFTWARE INSTALLATION GUIDE SOFTWARE INSTALLATION GUIDE The software that comes with the Concord Eye-Q 4360z includes driver, reader, and photo editor programs. These programs transfer the pictures or video clips from your camera to your computer, and enable you to view them on your computer screen. The following are the computer system requirements for these programs to be installed.
USING THE INSTALLER SPLASH SCREEN The installer will automatically detect which software applications need to be installed or if they are not necessary. This will be indicated by the buttons on the splash screen that appears when the CD-ROM is inserted into the computer: Color Description Yellow ( Gray ( ) ) Required or highly recommended to install.
En SOFTWARE INSTALLATION GUIDE FLOW DIAGRAM FOR SOFTWARE INSTALLATION To transfer the pictures and video clips from the memory card, the camera must be connected to a computer with the provided Mini-USB cable. Additional setup maybe required by some operating systems before connecting the camera to the computer for the first time. Identifying your operating system Windows 98/98SE p.41 Windows 2000 Professional p.43 Installing the USB Mass Storage Drivers and DirectX 9 p.41 Windows Me/XP p.
IDENTIFYING YOUR OPERATING SYSTEM Windows 1. Right click the My Computer icon on your desktop, and go to Properties. 2. The System Properties Box will appear. The information about your computer is listed under the system area. 3.
En SOFTWARE INSTALLATION GUIDE INSTALLING THE DRIVER AND DIRECTX 9 – WINDOWS 98/98SE NOTE: Do not connect the camera to your computer before the camera drivers and Microsoft DirectX 9 installation is completed. Step 1 Make sure your camera is powered off and not connected to the computer. Step 2 Make sure the computer is powered on and Windows 98 or 98SE is running. Step 3 Close any other applications or software you may be running.
SOFTWARE INSTALLATION GUIDE Click [Install]. Step 10 Install progress bar Step 11 The next screen will begin the DirectX setup. En Step 9 Select " I accept the agreement " then click [Next >]. Step 12 Click [Next >]. Step 13 Click [Finish]. Your computer will automatically reboot. 42 Downloaded from www.Manualslib.
En SOFTWARE INSTALLATION GUIDE INSTALLING DIRECTX 9– WINDOWS 2000 Step 1 Make sure your camera is powered off and not connected to the computer. Step 2 Make sure the computer is powered on and Windows 2000 is running. Step 3 Close any other applications or software you may be running. Step 4 Insert the CD-ROM included in your camera’s packaging into your computer’s CD-ROM Drive.
INSTALLING ARCSOFT PHOTOIMPRESSION – ALL WINDOWS USERS Step 1 Make sure your camera is powered off and not connected to the computer. Step 2 Make sure the computer is powered on and Windows is running. Step 3 Close any other applications or software you may be running. Step 4 Insert the CD-ROM included in your camera’s packaging into your computer’s CD-ROM Drive.
En SOFTWARE INSTALLATION GUIDE Step 9 Click [Next >]. Step 10 Make sure all two applications are checked and then click [Next >]. Step 11 Click [Next >]. Step 12 The screen will show the status of the installation. Step 13 Click [Finish]. 45 Downloaded from www.Manualslib.
INSTALLING ADOBE ACROBAT READER 5- ALL WINDOWS USERS (OPTIONAL) Step 1 Make sure your camera is powered off and not connected to the computer. Step 2 Make sure the computer is powered on and Windows is running. Step 3 Close any other applications or software you may be running. Step 4 Insert the CD-ROM included in your camera’s packaging into your computer’s CD-ROM Drive.
En SOFTWARE INSTALLATION GUIDE Step 9 The files will be saved into C:\Program Files\Adobe\Acrobat 5 automatically. OR You may change the default folder by clicking [Browse…] and selecting a different folder in your computer. Click [Next >]. Step 10 Installation progress Step 11 Select Yes, to restart the computer or No, to restart the computer later. Click [Finish >]. 47 Downloaded from www.Manualslib.
CONNECTING THE CAMERA T O THE COMPUTER Note for Windows 98 and 98SE users: Do not connect the camera to your computer before the camera drivers and Microsoft DirectX 9 installation is completed. 1. Power the camera on. 2. Connect the camera to the computer with the Mini-USB cable provided. • Plug the larger end of the Mini-USB cable that is included with the camera into your PC’s USB port. (Please refer to your computer’s documentation for more information on the location of the USB port.
En CONNECTING THE CAMERA TO THE COMPUTER USING ARCSOFT PHOTOIMPRESSION Windows Only 1. Connect the camera to the computer. (p.48) 2. Launch ArcSoft PhotoImpression software by clicking on Start-Programs-ArcSoft Camera Suite and choosing PhotoImpression from the application list on your screen. 3. When the Application opens. 4. Click on the [Camera/ Scanner] button.(a) 5. Click on the drop-down list under Select Source and choose Concord Camera.(b) 6. Click on the Camera/ Scanner Icon.
TV MODE - VIEWING AND DELETING YOUR FILES ON TV The camera allows you to view individual files and record clips on the television. To begin, check your television documentation to determine what video standard you should set your camera to either NTSC or PAL. CAMERA MODE WHITE BALANCE + EV COMPENSATION – SETUP RETURN SELECT SETUP T TV OPTION SET AUTO OFF TIME TV OPTION LANGUAGE OPTION RESTORE DEFAULT LCD BRIGHTNESS RETURN SELECT Changing the TV Mode setting: 1. Slide the Mode Switch to ( ). 2.
En ERROR MESSAGES ERROR MESSAGES Internal Memory Error 07 ⁄ 04 ⁄ 03 ⁄ 02:40PM ⁄ ⁄ Memory Full Card Full ⁄ 07⁄ ⁄ 04 ⁄ 03 ⁄ 02:40PM ⁄ ⁄ ⁄ 07 ⁄ 04 ⁄ 03 02:40PM Error Messages on the LCD indicate if the memory is full or if there is a problem with the memory. Note: If the internal memory or the memory card is corrupted, the LCD will read ERROR! The memory needs to be formatted. Please format all files to continue. (Page.
TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION Batteries were not installed correctly. Install batteries correctly using the direction indicators indicators on the edge of the top of the battery compartment. Batteries are dead or weak. Replace batteries. Battery compartment door was not closed correctly. Close the battery compartment properly. The camera/buttons do not work. The camera needs to be reset.
En TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION Picture taken is blurry. Subject or camera was moved as the picture was taken. Hold camera steady until picture is taken. The focus was not locked before taking the picture. Before taking a picture, press the shutter button half-way to lock the focus, and press the shutter button fully to capture the picture. (p.12) There is something wrong with the color of your photographs. White balance is not set properly.
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION VIEWING VIDEO CLIPS ON THE COMPUTER (WINDOWS 98/98SE/2000) Cannot playback stored video clips on the computer. Video playback files are missing. Install Microsoft DirectX 9. (p.41) INSTALLING SOFTWARE AND DRIVERS Camera is not responding during picture download to the PC. Cannot transfer pictures to the computer. The New Hardware Wizard cannot locate drivers.
En GETTING HELP GETTING HELP You can get help from our troubleshooting section, FAQ on our website or by contacting a customer support representative. Troubleshooting Section If you need help with your camera, refer to the Troubleshooting section of this manual on page 52. Website Customer Support/FAQ Please visit our customer support website at www.concord-camera.com to view the Frequently Asked Questions (FAQ) by clicking the appropriate camera model picture in the “Camera Support “ Section.
CAMERA SPECIFICATIONS En CAMERA SPECIFICATIONS Lens 7.23 - 21.7mm (equivalent to 35-105mm in 35mm format) f/2.8 - f/4.7, 6 groups 6 elements all glass Optical Zoom 3X in 11 steps Digital Zoom 6X Focus Range Auto Focus from 50cm to infinity (20 in. to infinity), macro from 10 cm to 50 cm (4 in. to 20 in.) Image Sensor 1/1.
En CAMERA SPECIFICATIONS Multi Language Support User selectable UI on TFT OSD menu. The languages included are Spanish, Italian, German, English, French, Dutch and Simplified Chinese.
SAFETY TIPS AND MAINTENANCE En SAFETY TIPS AND MAINTENANCE Cleaning the camera body: 1. Please use a soft dry cloth to clean the camera. Cleaning the lens, viewfinder and LCD: 1. Blow off dirt or dust with a blower or canned air. 2. Gently wipe the lens, viewfinder and/or LCD with a micro-fiber cloth. 3. To remove dirt or residue, moisten the cloth with lens cleaning fluid and gently wipe the lens, viewfinder and/or LCD. CAUTION: Do not apply the fluid directly onto the lens, viewfinder or LCD.
En SAFETY TIPS AND MAINTENANCE Precautions for batteries: • Use 2x AA batteries only. • Dispose of the batteries in a manner that complies with applicable laws. • Leakage, overheating, or burst batteries could result in fire or injury. • Do not short circuit, heat or dispose of batteries in fire. • Do not use old batteries with new ones, or mix brands of batteries. • Ensure the batteries are positioned correctly with regard to polarity (+/-).
REGULAT ORY INFORMATION FCC INFORMATION FCC WARNING: This equipment meets the limits for a Class B digital device, pursuant to Part 15 of FCC rules. Only the cable supplied with the camera should be used. Operation with other cables is likely to result in interference to radio and TV reception and could void the user’s authorization to operate this equipment. This device complies with Part 15 of the FCC Rules.