DEUTSCH 03 ENGLISH 25 FRANÇAIS 47 ESPAÑOL 69 ITALIANO 91 PORTUGUÊS 113 NEDERLANDS 135 NORSK 157 DANSK 179 SUOMI 201 Norm DIN EN 1888:2005 standard DIN EN 1888:2005 norme DIN EN 1888:2005 norma DIN EN 1888:2005 szabvány DIN EN 1888:2005
_ ENGLISH OVERVIEW THANK YOU! PLEASE NOTE ATTACHING AND REMOVING THE BACK WHEELS USING THE PARKING BRAKE LOCKING THE FRONT WHEELS UNFOLDING AND FOLDING ATTACHING AND REMOVING THE SEAT FRAME (PROFIX SYSTEM) SETTING THE SEAT ANGLE USING THE SAFETY BAR USING THE SUN SHADE ADJUSTING THE HANDLEBAR ADJUSTING THE FOOTREST USING THE HARNESSING SYSTEM USING THE WIND PROTECTOR USING THE RAIN COVER PUTTING ON, REMOVING AND LAUNDERING THE COVER CONCORD ORIGINAL SPARE PARTS/ACCESSORIES GUARANTEE 26 28 28 30 31 31 32 33
_ OVERVIEW 11 Handlebar 01 Sun shade 02 Handlebar unlocking button 03 Seat frame 06 ProFix unlocking lever 04 Wind protector 05 Safety bar unlocking button 07 Footrest 26 12 Adjustment handle 15 Safety bar 16 ProFix adapter 17 Footrest unlocking button 18 Transport lock 08 Luggage net 09 Front wheel lock 13 Parking brake lever 14 Unlocking lever with safety button 10 Parking brake 19 Pushbutton 27
_ THANK YOU! You have made a good choice with this Concord quality product. You will be impressed by the versatility and safety of this product. We hope you will have lots of fun with your new CONCORD NEO. _ PLEASE NOTE IMPORTANT! • Please read the instructions carefully before using the CONCORD NEO for the first time and retain them for future reference.
_ ATTACHING AND REMOVING THE BACK WHEELS _ USING THE PARKING BRAKE To attach the back wheel, press and hold the pushbutton as you push the wheel onto the CONCORD NEO axle, and let it click audibly into place. Push the operating lever (13) on the right of the handlebar (11) down to activate the parking brake (10) of the CONCORD NEO. Press the release button and move the operating lever (13) on the right of the handle bar (11) upward to release the parking brake.
_ UNFOLDING AND FOLDING To set up the CONCORD NEO, first release the transport lock (18) by pressing it downwards or backwards. Then pull the handlebar (11) upwards until you hear it engage with a clear click. _ ATTACHING AND REMOVING THE SEAT FRAME (PROFIX SYSTEM) The CONCORD NEO is equipped with ProFix adapters (16). These adapters are used to attach the CONCORD NEO seat frame to the chassis. You can secure the seat frame to the chassis so that it is either front or rear facing.
_ SETTING THE SEAT ANGLE To remove the seat frame from the chassis, pull simultaneously on the right and left ProFix unlocking levers (06) on the seat frame and pull the frame upwards and away from the chassis. Tip: Various elements can be attached to the CONCORD NEO by means of the ProFix adapter. Some Concord accessories, available from specialist retailers, are equipped with adapters suitable for the CONCORD NEO, making it easy to attach them to the CONCORD NEO.
_ USING THE SAFETY BAR _ USING THE SUN SHADE The safety bar (15) on the CONCORD NEO engages in the receivers provided for this purpose in the seat frame. You can open the safety bar on both sides or just on one. To do this, press the relevant unlocking buttons (05) on the left and right of the seat frame. To secure the CONCORD NEO sun shade (01) onto the seat frame, push it from above onto the relevant plastic receivers on the seat frame.
_ ADJUSTING THE HANDLEBAR _ ADJUSTING THE FOOTREST The handlebar can be adjusted to seven different positions. To do this, release the positioning mechanism by pressing both the unlocking buttons (02) on the left and right of the handlebar and move the bar until it engages in the next position. You can adjust the footrest (07) to five different positions. To do this, simultaneously press the left and right unlocking buttons (17). Then adjust the footrest until it engages in the required position.
_ USING THE HARNESSING SYSTEM Take care that your child is always strapped in, with the buckle fastened, whenever you go out with the pushchair. Adjust the straps so that they are taut and lie close against the child. To adjust the strap length, slide the strap clasps up or down. Check that the straps are not twisted. Shoulder strap Waist strap Centre strap Feed the centre strap with the buckle between the child’s legs.
_ USING THE WIND PROTECTOR _ USING THE RAIN COVER The CONCORD NEO is equipped with an integrated wind protector (04). To use it, undo the zip on the safety bar and stretch the wind protector across the footrest. To use the rain cover, pull it from the top to the bottom across the seat frame.
_ PUTTING ON, REMOVING AND LAUNDERING THE COVER The different parts of the cover of the CONCORD NEO are joined to each other by means of press-studs, Velcro and zip fasteners, and are attached to the rods. If you wish to remove the cover, first loosen all these fastenings. Make sure all the fasteners and connections are done up safety when you put the cover on. You can wipe all parts of the cover as well as the rods and the plastic parts of the CONCORD NEO with a damp cloth.
46
Concord GmbH Industriestraße 25 95346 Stadtsteinach Germany Phone +49 (0)9225.9550-0 Fax +49 (0)9225.9550-55 info@concord.de www.concord.