INSTRUCTION MANUAL User Manual

22 23
_ USinG THE HaRnESS SySTEM
Guide the central harness with the harness
lock up between the legs of the child. Click the
harness lock adapters of the shoulder and lap
harnesses into their respective receptacles in
the harness lock.
Open the harness lock and place the harnesses to the sides and downward.
Place your child onto the seat as far back as possible.
Shoulder harness
Central harness
Simply press the central button on the harness
lock to release the individual harness adapters.
Lap harness
Make sure that your child is always securely harnessed when using the
buggy.
Make sure that the plastic anchors at the ends of the harnesses are threaded
tightly through the openings (03) and that the harnesses are not twisted.
Testforcorrectadjustmentbytuggingontheshoulderharnesseswith
moderate strength.
Ensure that none of the harness straps are twisted.
The child safety lock is located on the back of
the harness lock.
It can be activated and deactivated by simply
turning it. The activated child safety lock
blocks the opening mechanism of the harness
lock.
WaRninG!
• Onlyusetheshoulderandlapharnessincombinationwiththecentral
harness.
Adjusttheharnessstrapsuntiltheysit
snug and tight on the child.
Slidethebeltadjustersupordownto
adjustthelengthoftheharness.
Youwillhavetoadjustthelengthsofthe
shoulder straps periodically as your child
grows. Thread the harnesses out of the
openings in the backrest (03) and thread
them back through the openings (03)
matching your child’s size.
Always make sure to thread the right and
left shoulder harness into an opening of
the same height.