INSTRUCTION MANUAL Owner's manual

4342
Toreplace,startwiththecoverfortheseatsection.Firstly,pullthecoveroverthe
coverpanelonthebackrest,andthen,fromthefront,pullitoverthearmrestsandseat
section.
Secure the cover using all of the fastening points.
Attachthecoverfortheheadsection(01).
Placethematchingstyrofoampartsintothe
markedpocketontheinsideofthecovers
fortheshoulderarea(02). Now pull the
covers over the protectors for the shoulder
area(02).
Thecoversandstyrofoampartsmustnot
be reversed!
•Whentheycomeintocontactwithmoisture,especially
 duringwashing,thecoverfabricsmayfadeslightly.
•Donotusesolvents!
_ CArE iNSTrUCTiONS
Thecovercanberemovedforwashing.
Todoso,movetheheadsection(01) to its highest
position.Toremove,pullthecoverawayfromits
anchoringpoints.Beginbyremovingtheheadsection
(01)followedbytheseatsectionandtheshoulder
shields(02).
Removethestyrofoampartsfrom
thecoversintheshoulderarea(02)
before washing.