Product Specifications

0619
A Division of Concorde Battery Corp.
Sun Xtender pioneered renewable energy storage
batteries for Off Grid and Grid Tied Solar and Wind
Systems as well as uninterruptible power for essential
appliances and machines. PVX-2240T is a deep cycle
AGM battery.
Since 1987, Sun Xtender Battery has been designing
valve regulated lead acid batteries with AGM
construction (VRLA-AGM). The non-spillable construction
eliminates the requirement to monitor and replenish
water levels.
Utilizing pure lead calcium grids, the plates are thicker
than the industry standard for longer cycle life, increased
reliability and power. The low impedance AGM design
allows for excellent charge acceptance and there is no
current limit required with controlled voltage charging.
The complete Sun Xtender product line features
proprietary PolyGuard
®
Microporous Polyethylene
Separators, shielding the positive plates against shorting,
shock or vibration. No other manufacturers offer this dual
layer insulation protection feature.
Sun Xtender battery covers and containers are uniquely
molded with high impact, reinforced copolymer
polypropylene and are designed with thick end walls
to prevent bulging. The copper alloy T Terminals are
corrosion resistant and are supplied with silicon bronze
bolts and washers.
All SunXtender Batteries ship Hazmat Exempt.
PVX-2240T Specifications
Voltage 6 Volts
Industry Reference Group GC2
Maximum Weight 67 LB / 30.4 KG
Nominal Capacity Ampere Hours @ 25° C (77° F) to 1.75 volts per cell
1 Hr. Rate 2 Hr. Rate 4 Hr. Rate 8 Hr. Rate 24 Hr. Rate 100 Hr. Rate
143 Ah 180 Ah 185 Ah 204 Ah 224 Ah 260 Ah
Specifications are subject to change without notice. The data/information
contained herein has been reviewed & approved for general release on
the basis that this document contains no export controlled information.
PVX-2240T
PVX-2240T
SOLAR BATTERY
A SAE Automotive Post
Optional (copper alloy) terminal
installed at the factory. Most batteries
are available with an optional factory
installed “A” SAE automotive type
terminal by adding the appropriate
suffix to the end of the part number.
For example, order PVX-1040TA
instead of PVX-1040T.
M8 Threaded Insert
Standard Terminals
All batteries with a “T” at the end
of the part number incorporate M8
(copper alloy) threaded insert terminals
except PVX-340T (M6) & PVX-420T
(M6). All batteries are supplied with
silicon bronze bolts, nuts, and washers
required for installation.
2 M8 TERMINALS
2 ROPE LIFTING HANDLES
10.28
(261.1 MM)
2X .29
(7.3 MM)
9.63
(244.5 MM)
10.22
(259.6 MM)
6.95
(176.5 MM)
7.06
(179.3 MM)
2009 San Bernardino Road | West Covina, CA 91790
626.813.1234 626.813.1235
www.sunxtender.com