Product Specifications

0218
A Division of Concorde Battery Corp.
PVX-2580L
PVX-2580L
SOLAR BATTERY
2009 San Bernardino Road | West Covina, CA 91790
626.813.1234 626.813.1235
www.sunxtender.com
10.22
(259.5 MM)
10.89
(276.6 MM)
HANDLES
2 “L” TERMINALS
9.77
(248.3 MM)
19.06
(484.1 MM)
20.76
(527.4 MM)
8.64
(219.5 MM)
PVX-2580L Specifications
Voltage 12 Volts
Industry Reference Group 8D
Maximum Weight 159 LB / 72.1 KG
Nominal Capacity Ampere Hours @ 25° C (77° F) to 1.75 volts per cell
1 Hr. Rate 2 Hr. Rate 4 Hr. Rate 8 Hr. Rate 24 Hr. Rate 100 Hr. Rate
165 Ah 209 Ah 214 Ah 236 Ah 258 Ah 300 Ah
Specifications are subject to change without notice. The data/information
contained herein has been reviewed & approved for general release on
the basis that this document contains no export controlled information.
L Blade Terminal
Heavy duty solid copper with silicon
bronze bolts, washers, and nuts.
PVX-2120L & PVX-2580L are “L”
Blade (solid copper) terminals.
Sun Xtender pioneered renewable energy storage
batteries for Off Grid and Grid Tied Solar and Wind
Systems as well as uninterruptible power for essential
appliances and machines. PVX-2580L is a deep cycle
AGM battery.
Since 1987, Sun Xtender has been designing valve
regulated lead acid batteries with AGM construction
(VRLA-AGM).The non-spillable construction allows the
battery to be used upright or on its end or side and
the maintenance free AGM design means no water
replenishment ever.
Utilizing pure lead calcium grids, the plates are thicker
than the industry standard for longer cycle life, increased
reliability and power. The low impedance AGM design
allows for excellent charge acceptance and there is no
current limit required with controlled voltage charging.
The complete Sun Xtender product line features
proprietary PolyGuard
®
Microporous Polyethylene
Separators, shielding the positive plates against shorting,
shock or vibration. No other manufacturers offer this dual
layer insulation protection feature.
Sun Xtender battery covers and containers are uniquely
molded with high impact, reinforced copolymer
polypropylene and are designed with thick end walls to
prevent bulging. The heavy duty solid copper L Terminals
are corrosion resistant and are supplied with silicon
bronze nuts, bolts and washers.
All SunXtender Batteries ship Hazmat Exempt.