Product Specifications

0619
2009 San Bernardino Road | West Covina, CA 91790
626.813.1234 626.813.1235
www.sunxtender.com
A Division of Concorde Battery Corp.
PVX-340T Specifications
Voltage 12 Volts
Industry Reference U1
Maximum Weight 25 LB / 11.4 KG
Nominal Capacity Ampere Hours @ 25° C (77° F) to 1.75 volts per cell
1 Hr. Rate 2 Hr. Rate 4 Hr. Rate 8 Hr. Rate 24 Hr. Rate 100 Hr. Rate
21 Ah 27 Ah 28 Ah 30 Ah 34 Ah 37 Ah
Specifications are subject to change without notice. The data/information
contained herein has been reviewed & approved for general release on
the basis that this document contains no export controlled information.
PVX-340T
7.71
(195.9 MM)
6.89
(175.0 MM)
7.51
(190.9 MM)
6.19
(157.2 MM)
6.69
(169.9 MM)
5.18
(131.6 MM)
4.97
(126.2 MM)
2 M6 TERMINALS
PVX-340T
SOLAR BATTERY
M6 Threaded Insert Standard
Terminals (Copper Alloy)
M6 Threaded Inserts are used for PVX-
340T & PVX-420T only. All batteries
with a “T” at the end of the part
number incorporate M8 threaded insert
terminals, all batteries are supplied with
silicon bronze bolts, nuts, and washers
required for installation.
SOLAR BATTERY
VRLA-AGM Deep Cycle Battery for Off Grid and Grid
Tied Systems.
Sun Xtender batteries provide safe, reliable and long
lasting power. Environmentally friendly, there is no
exposed lead on Sun Xtender batteries and they are
100 percent recyclable. Sustainable, Clean, Renewable
Energy Storage.
Since 1987, Sun Xtender Battery has been designing
valve regulated lead acid batteries with AGM
construction (VRLA-AGM). The non-spillable construction
eliminates the requirement to monitor and replenish
water levels.
Utilizing pure lead calcium grids, the plates are thicker
than the industry standard for longer cycle life, increased
reliability and power. The low impedance AGM design
allows for excellent charge acceptance and there is no
current limit required with controlled voltage charging.
PVX-340T and the complete Sun Xtender Battery product
line features proprietary PolyGuard
®
Microporous
Polyethylene Separators, shielding the positive
plates against shorting, shock or vibration. No other
manufacturers offer this dual layer insulation protection
feature.
Sun Xtender Battery covers and containers are uniquely
molded with high impact, reinforced copolymer
polypropylene and are designed with thick end walls
to prevent bulging. The copper alloy T Terminals are
corrosion resistant and are supplied with silicon bronze
bolts and washers.
All Sun Xtender Batteries ship Hazmat Exempt.