User manual

7. Operations
7.1 Check Location
7.1.1 Query Coordinates by SMS
To query coordinates of the terminal, you can send the query command to it. The
terminal will reply the coordinates of last location. If it fails to get location
information, it will reply the message as follows: “No data!”
Command format: WHERE#
Example:
Lat:N22.571285,Lon:E113.877115,Course:42.20,Speed:0.0740,DateTime:10-11-23
22:28:51
7.1.2 Query Google Link by SMS
To query Google link of the terminal’s location, you can send the query command to it.
The terminal will reply the Google link of last location. If it fails to get location
information, it will reply the message as follows: “No data!”
Command format: URL#
Example:
<Date Time: 10-11-23 23:42:51>
http://maps.google.com/maps?q=N22.571490,E113.877103
7.1.3 Check the location via platform
The user can login the platform offered by the dealer to check the location of the
vehicle.
7.2 Vibration Alarm
When the vehicle power is off and ACC is in low-level for more than 10mins, the
device will enter defense status automatically. In this case, if the vehicle vibrates for
several times, it will activate the vibration alarm system. If the vehicle power is still
off (ACC is in low level) after 3mins, the device will send a vibration alarm right
away. Then device will send alarm information and exact longitude and latitude to
platform, while platform will decode the longitude and latitude into Chinese address
and send it back to the terminal. And the terminal will send the address to all the
predefined SOS numbers.
In case the terminal can not acquire the Chinese address for some reason, it will send
a Google link to the predefined SOS numbers.
Note:
1. The SOS numbers must be predefined for vibration alarm function!