User manual

6 Operation
6.1 Check location
(1) Ask for coordinates
Send SMS command from SOS number to the terminal: WHERE#
Only SOS number can apply for replying longitude and latitude from the terminal. If GPS is
located, it will reply latest longitude and latitude information.
e.g. Lat:N22.571285,Lon:E113.877115,Course:42.20,Speed:0.0740,DateTime:10-11-23 22:28
If GPS is not located at all, the terminal will reply: “NO DATA!”
(2)Ask for Google link
Send SMS command from SOS number to the terminal: URL#
If GPS is located, it will reply google link of latest longitude and latitude.
e.g. Google link reply
“<DateTime:10-11-23 23:42:51>
http://maps. google.com/maps?q=N22.571490,E113.877103”
(3) Check platform
The terminal will send position information to the platform server timely. Users can check the
position on the platform.
The platform website: www.cootrack.net
Please contact your supplier for the login methods and operations.
6.2 Vibration Alarm (ON as default)
When the vehicle is turned off (ACC low) and stays off for 3 minutes (pre-set), the terminal will
enter arm status. During this time, if the terminal detects 6 times vibrations (default) and the
vehicle still stays off (ACC off) in 30 seconds, it will activate vibration alarm. The terminal will
upload longitude and latitude data to the platform. Then the platform will send the google link to
SOS number.
e.g. GPS information link:
“vibration alarm: <DateTime:10-11-23 23:42:51>
http://maps. google.com/maps?q=N22.571490,E113.877103”
If you do not want to receive vibration alarm messages, send SMS command: SENALM,OFF# to
turn it off.