User manual

6.3 Cable cut-off Alarm (ON as default)
When the terminal cable is cut off, the cable cut-off alarm will be activated. The terminal will
send the alarm to the platform and upload longitude and latitude data. And the platform will
send google link to SOS number.
e.g. GPS information link:
“Cut Power! <DateTime:10-11-23 23:42:51>
http://maps. google.com/maps?q=N22.571490,E113.877103”
Send SMS command: POWERALM,OFF# to turn it off.
6.4 Low Battery Alarm (ON as default)
When the battery is low, the terminal will send SMS to SOS numbers and upload alarm
information to platform.
Send SMS command: BATALM,OFF# to turn off the alarm.
6.5 Moving alarm (OFF as default)
Send SMS command: MOVING,ON,R# (100≤R≤1000 meters, 300 is recommended)
In the situation where ACC becomes low, if the vehicle is moved over 300 meters (pre-set) from
the latest location, the terminal will send moving alarm to the platform. SOS number will receive
moving alarm message.
e.g.
“Attention! The vehicle is moved. <DateTime:10-11-2323:42:51>
http://maps.google.com/maps?q=N22.571490,E113.877103”
Send SMS command: MOVING,OFF# to turn off the alarm
6.6 Petrol cut-off
(1) Cut-off petrol
When the vehicle was stolen, you can cut off the petrol on the platform in the situation where
the GPS has located and the speed is under 20km/h. Platform password is needed. Or you can
send SMS command to the device.
Send SMS command: RELAY,1# to cut off petrol.
(2) Restore petrol
You can restore petrol on the platform. Platform password is needed.
Send SMS command: RELAY,0# to restore petrol.
NOTE: Petrol cut-off and restore commands can be executed by the center number ONLY.