Installation Instructions

24 Mounting and installation work
5 Mounting and installation work
5.1 Safety notes on mounting and installation work
Qualication of personnel
All mounting and installation work must be carried out only by well qualied personnel authorised by
the owner. It is the owner’s responsibility to verify proper qualication of the personnel.
General notes
Strictly observe and comply with all information given in the present installation manual regarding the
mounting of the unit and the installation of water, steam and electricity.
Observe and comply with all local regulations dealing with water, steam and electrical installations.
Safety
Some installation work requires removal of the unit covers. Please note the following:
DANGER!
Danger of electric shock!
The Condair RS is mains powered. Live parts may be exposed when the unit is open. Touching
live parts may cause severe injury or danger to life.
Prevention: The Condair RS must be connected to the mains only after all mounting and installation
work has been completed, all installations have been checked for correct workmanship and the unit
is closed and properly locked.
CAUTION!
The electronic components inside the humidier are very sensitive to electrostatic discharge.
Prevention: To protect these components against damage caused by electrostatic discharge (ESD
protection) appropriate measures must be taken when the unit is open for installation work.