Operation Manual
45Operating the control software
Fault/Service History Tab
Note: the fault and maintenance events stored can be correctly analysed only
if the data and the time of day are correctly set.
– Fault History: with this function you can access the fault history list where
the last 40 fault events are stored. After pressing on the "Fault History"
button the fault history list appears.
– Service History: with this function you can access the service history list
where the last 40 service events are stored. After pressing on the "Service
History" button the service history list appears.
– Export History: with the function "Export History" you can export the
fault and service history list to a FAT32 formatted USB memory stick via
the USB port on the control board. Detailed information can be found in
chapter 7.4.
Diagnostics Tab
– Input Diagnostics: with this function you can access the "Input Diagnostics"
submenu where you can view different current input values the control
system is using. Detailed information can be found in chapter 5.5.2.1.
– Relay Diagnostics: with the "Relay Diagnostics" function you can access
the "Relay Diagnostics" submenu where you can activate or deactivate
the relays of the optional remote operating and fault indication board and
the optional accessory board. Detailed information on the individual relay
diagnostic functions can be found in chapter 5.5.2.2.
Note: By accessing the "Relay Diagnostics" submenu the humidication
system is automatically switched to standby operation.
– RO Service Reset: with the "RO Service Reset" function you can reset the
service message or the service counter, respectively for the maintenance
of the RO systems. After pressing on the "RO Service Reset" button a
conrmation window appears where the resetting must be conrmed.
Note: this menu item appears only, if the Condair RS is connected to a
Condair RO-A reverse osmosis system and if the reverse osmosis system
was activated in the factory menu.