Operation Manual

47Operating the control software
– 24V External Supply: Actual voltage of the external 24 V supply.
– 10V External Supply: Actual voltage of the external 10 V supply.
RO Tab
The "RO Tab" appears only, if the Condair RS is connected to a Condair RO-A reverse osmosis system
and if the reverse osmosis system was activated in the factory menu.
– PS1: Actual inlet pressure of the pump of the reverse osmosis system in
bar.
– PS2: Actual pressure in the pressure tank of the reverse osmosis system
in bar.
– Guard: Actual status of the pump motor guard switch of the reverse os-
mosis system ("Off"= switch open, "On"= switch closed).
– PS3: Actual pressure at the membrane inlet of the reverse osmosis system
in bar.
– Regeneration: Actual status of the regeneration switch of the optional
water softener of the reverse osmosis system ("Off"= No regeneration in
progress, "On"= Regeneration in progress).
– Leakage: Actual status of the optional leakage monitoring switch of the
reverse osmosis system ("Off"= No leakage present, "On"= Leakage
detected).