Condeco User Manual for V2 Touch Screen Condeco 2 Harbour Exchange Square London E14 9GE www.condecosoftware.
Contents Contents ............................................................................................................................. 2 User manual........................................................................................................................ 4 Technical Specification ................................................................................................... 4 Equipments required: .....................................................................................
Responsibility Name Owner Condeco Ltd Author(s) Reviewer Approver Version Status Reason for change Date 1.
User Manual for V2 Touch screen Technical Specification: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Win CE7 operating system. 10.1” LCD with CTP. i.MX6 Dual cord prosessor. 1Gbyte DDR3. 8 Gbyte managed NAND (eMMC). MicroSD connector. WiFi 802.11 b/g/n 10/100/10000 Ethernet. RFID TI1 standard on board. RFID LED functionality incorporated into main central LED. USB host connector – type A. USB host connector – type B. RGB indicatior LED’s. RTC coin cell. POE. iBeacon. Legic Modular Plug-in.
Connect the POE network cable to RJ45 connector at the back of the screen to power it up. To book the meeting room: 1. Once it has powered on, the Resource ID screen will comes up. Key in the Resource ID (for example: 180) on the touch screen and then press Confirm button.
2. Press the time displayed on the screen to choose when you want to use the meeting room. 3. The time you have chosen will be highlighted in yellow. Press Confirm button.
4. Swipe the RFID card at bottom centre of the display panel, or key in the pin on the touch screen to book the meeting room. 5. Once it has been successfully booked, the time bar on the screen will become red.
To Start the Meeting: Press Start button on the touch screen. To End the meeting: 1. If you have finished using meeting room before the time run out, you can end the meeting to free the room by press End button on the screen.
2. Swipe the RFID card at bottom centre of the display panel, or key in the pin on the touch screen. 3. Once the card or PIN has accepted, then the time booking bar will be cleared.
To Extend the meeting: 1. Press Extend button on the touch screen. 2. Press + button to extend the time. Then press Confirm button to confirm it.
3. Swipe your card or key in the user PIN to extend the booking. 4. Once your card or PIN has been accepted, the extension will be confirmed on the time bar in red.
About Condeco Room Booking Condeco Meeting Room Booking software helps you to maximise your meeting room space, reduce admin time and introduce smarter booking processes into your workplace. Key features include Hospitality and Resource Management as well as Video Conference booking. We also offer interactive room signage and Mobile Room Booking. About Condeco We are the leading provider of meeting room and desk booking solutions, as well as advanced digital signage solutions.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.