Specifications

Condre, Inc.

Making a Composite CD with Hard Drive

This procedure explains how to:

 identify and copy selected tracks from multiple CDs into a partition on

the hard drive, and

 copy the loaded tracks from the hard drive to a CD.

Before you begin, make sure you are in the HDD-to-Disc mode and your

HDD partition is empty.

1. Turn on the system. Note the mode of operation in the LCD display area

(copy, load, emulate, etc.). Your LCD display should look something like

this:

Copy

<mode

2. Press and hold the Mode button until you hear the system “chirp.” Then

release the Mode button. You should see setup displayed in the LCD

panel:

Go>

Setup

<mode

Press the Mode button once to enter the Edit mode.

Edit

<mode

9. Place the master CD that contains the first track(s) you wish to copy to the

hard drive in the first CD drawer. Close the CD drawer. Note that the

system automatically starts analyzing the contents of the master CD and

displays the prompt, begin track:

Begin Track

[+] 0 [Q]