Specifications

Condre, Inc.

delete the last track that was loaded to the hard drive.

0. At the system prompt, 1start>, press the Go button to copy the tracks from

to CD, using all

compilation by placing blank CDs in one or all of the remaining drawers. The

ystem will automatically detect the number of blank CDs in the CD drawers.

1. Turn on the system. Note the mode of operation in the LCD display area

(copy, load, emulate, etc.). Your LCD display should look something like

ed in the LCD

3. Press the Mode button once to enter the Edit mode.

28. Press and hold the Mode button to display the copy mode.

29. Place a blank CD in the first CD drawer. Close the drawer.

the hard drive to the CD.

You have already set the system up to copy from the hard drive

of the available drawers. You can make multiple copies of your track

When you are copying fewer than maximum CDs, you must press the Go

button to begin the duplication process. (It starts automatically when you put in

all of the blank CDs.)

Making a Composite CD without Hard Drive

Making

This procedure explains how to:

 identify and copy selected tracks from multiple CDs directly into blank

CDs.

Before you begin, make sure you are in the Disc-to-Disc mode.

this:

2. Press and hold the Mode button until you hear the system “chirp.” Then

release the Mode button. You should see setup display

panel:

Go>

Setup

<mode

Copy

<mode