Specifications

Condre, Inc.
1.2 HDD Partition Size See Changing HDD Partition for more detail.
Press MODE button to change.
Auto: controller will select partition size based on drives installed.
ual Layer Drive: 9.6G
DVD Single Layer Drive: 4.8G
CD: 850M
tail.
of the hard drive installed in your unit.
onfirm.
ever, if you wish to only use 2 out of 4
xample, then you can select 2 here the remaining 2 will be ignored
ication. Press the MODE button to change the setting. Press GO to
onfirm.
f CD/DVD writers installed in the unit.
nce. Press the MODE button to change the setting. Press GO to
ce
of older or slower-rated recordable media. Press the MODE button to
s GO to confirm.
DVD D
Default: Auto
1.3 HDD Partition Group See angin
artitio
Ch g HDD Partition for more de
P n groups differ on the capacity
Press the MODE button to change the Partition Group. Press GO to c
Default: A
1.4 HDD Partition See Changing HDD Partition for more detail
Select partition to be loaded to or copied from. Press the MODE button to change
the Partition Group. Press GO to confirm.
Default: A
1.5 Start Writers
This controls the number of writers that will be copying. This should normally
equal the number of writers installed. How
writers for e
uring dupld
c
Default: Number o
1.6 Write Method
Choose Disc-At-Once or Track-At-Once. Track-At-Once is normally used only
when mixing multiple tracks via the controller. We recommend leaving this at
Disc-At-O
confirm.
Default: Disc at On
1.7 CD Write Speed
This setting controls the disc to disc writing speed for CD. Lowering the speed
will ease duplication of troublesome masters. You may also lower the speed to
allow use
change the setting. Pres
Default: 32X
1.8 HD to CD Write Speed
21