Specifications

Condre, Inc.
and display a read-error message. If the setting is "Yes", there will be no
message shown even there is an error in reading. You can use this function to
or non-standard track configuration. Press the MODE
are Mode-2 formatted discs.
DE button to change the setting. Press GO to confirm.
c
DE button to change the setting. Press GO to
unction unless all drives, including reader and HDD, support UDMA66
. The system needs to reboot after any changes. Press the MODE
ting. Press GO to confirm.
Command
ear after booting up.
rm.
copy discs with errors
button to change the setting. Press GO to confirm.
Default: No
1.22 Mode 2 Compare
This setting allows the unit to more properly comp
Press the MO
efault: Yes D
1.23 Power on Wait
The setting controls the detecting time (in second) for devices that connected to
the duplicating controller card.
Default: 15 se
1.24 Go load trays
This function will allow the opened trays to be closed automatically by pressing
the “GO” button. Press the MO
confirm.
Default: No
1.25 UDMA66 support
This option will increase performance and stability of copying function. Do not
use this f
transfer mode
button to change the set
Default: No
1.26 Turbo copycomp
For achieving maximum burning speed allowed by writers. Press the MODE
button to change the setting. Press GO to confirm.
Default: No
1.27 Model Number and Version
Displays model number and firmware version.
1.28 Startup
This setting allows the user to pick which command will app
Press the MODE button to change the setting. Press GO to confi
Default: Copy
24