Specifications

Condre, Inc.

Introduction

he Tracer Pro Standalone Duplicator is a stand-alone duplicator that

requires no computer connection to operate. Low cost, high performance,

the Condre Tracer Pro Standalone series will fulfill your duplication requirements.

Especially designed for office applications, the Condre Tracer Pro Standalone

Duplicator is based upon a controller with a large LCD display and simple two-

button navigation, which make steps easy to follow during the duplication

process. Should you encounter any difficulty, please refer to the

"Troubleshooting" section (Page 23) or contact Condre Technical Support.

We strongly suggest you locate your Condre Tracer Pro in a dust free

environment. Dirty discs may cause duplication rejects or even total failure. Do

not place unnecessary items on the unit.

Important!: Make sure the voltage setting on the power supply is set correctly for

the region in which you are located. Typically, the setting is 115V in the United

States. Your unit should arrive pre-set to 115V.

For recordable media selection, we recommend you choose high-speed rated

and certified brand name discs (i.e. CMC, Taiyo Yuden, Fuji, Pioneer, Imation,

etc.) and make sure to reserve some discs for possible troubleshooting issues in

the future. Under no circumstance does Condre, Inc. encourage users to