Specifications

Condre, Inc.

7. Open the drive trays and load a blank CD/DVD in each drive. Close each drive after

you load the disc. The LCD will now count up from 1start, 2start and up to the full

capacity of the system. The unit will start copying automatically if all drives have been

loaded. If you wish to copy fewer than the full capacity, press GO button to start

copying.

Copy AA691M78:41

8. The duplication process will start and the LCD will display the copying progress and

speed.

Current HDD Partition Disc size in Megabyte and Duration

Drive mode. Consult

Copy AA691M78:41

C0005+32 32X32 0:40

Copying Progress + Memory Buffer Set Speed X Current Speed Elapsed Time

9. Once the duplication process is completed, the system will eject the discs that have

been copied correctly. The LCD will display the number of copies that have PASSED

and FAILED. Remove the discs and discard the failed discs.

# of discs copied OK # of discs failed

PASS 7 NG 0 TOK 7

counter of total discs copied OK – reset back to 0 when

master source is changed (new disc or new HDD partition)

10. For more copies of the same CD/DVD, repeat steps 7 through 9. For new CD/DVD,

repeat steps 3 through 9.

Copying Direct from Disc to Disc

1. Power on the system by pressing the round button at the bottom right of the front of

the unit. This unit will run trough a self-test, displayed on the LCD screen.

Power On ..15