Specifications

Condre, Inc.

2. Once the self-test procedure is completed, the COPY Mode will display on the LCD

screen. Ensure that the duplicator is in the Disc to Disc mode. Consult the manual for

further detail on how to change to Disc to Disc Mode

Copy

<mode

3. Insert the master disc into the top drive. The duplicator will scan and begin to analyze

the disc. The LCD screen will display the information about the disc.

Copy 691M78:41

<mode

4. Open the remaining drive trays and load a blank CD/DVD in each drive. Close each

drive after you load the disc. The LCD will now count up from 1start, 2start and up to

the full capacity of the system. The unit will start copying automatically if all drives

have been loaded. If you wish to copy fewer than the full capacity, press GO button to

start copying.

Copy 691M78:41

5. The duplication process will start and the LCD will display the copying progress and

speed.

Disc size in Megabyte and Duration

Drive mode. Consult

Copy 691M78:41

C0005+32 32X32 0:40

Copying Progress+Memory Buffer Set Speed X Current Speed Elapsed Time

6. Once the duplication process is completed, the system will eject the discs that have

been copied correctly. The LCD will display the number of copies that have PASSED

and FAILED. Remove the discs and discard the failed discs.

# of discs copied OK # of discs failed

PASS 7 NG 0 TOK 7

counter of total discs copied OK – reset back to 0 when

master source is changed (new disc or new HDD partition)

7. For more copies of the same CD/DVD, repeat steps 4 through 6. For new CD/DVD,

repeat steps 3 through 6.