User`s manual

5. ROUTER DESIGN
5.9.3 Antenna connector ANT, DIV (alternatively WIFI or WMBUS)
Main and diversity antennas are connected to the router using the SMA connector on the
front panel. If WIFI or WMBUS expansion port is eqquiped on customer’s request, on the front
panel is also available the third SMA antenna connector, through which the additional antenna
can be connected (it is reverse connector R-SMA in case of the WIFI expansion port).
The router can not operate without the main antenna connected labeled as ANT.
ANT connector is used to connect the main antenna router. To connect the diversity an-
tenna is used the second antenna connector marked as DIV. If WIFI or WMBUS expansion
port is eqquiped on customer’s request, there is also available WIFI or WMBUS antenna con-
nector for connecting corresponding antenna.
Example of antenna:
Figure 24: External antenna
For connection the antenna is used SMA connector. The antenna is connected by screwing
this antenna to the SMA connector on the front panel of the router (see figure below).
Figure 25: Connecting of the antenna
Diversity antenna improves radio features of the router at low signal strength.
16
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de