User`s manual

7. TECHNICAL PARAMETERS
7. Technical parameters
7.1 Technical parameters of router
CR10 v2
Complies with standards EN 301 526, v1.1.1,
EN 62311:2008
ETSI EN 301 489-25 v2.3.2,
EN 60950-1:06 ed.2 + A11:09 + A1:10 +
A12:11 + Opr. 1:12
Temperature range Function
Storage
-30
◦
C to +60
◦
C
-40
◦
C to +85
◦
C
Protection Freely
In switch board
IP20
IP56
Supply voltage 10 to 30 V DC
Consumption Reception
CDMA
2,3 W
to 4 W
Dimensions 42 x 76 x 113 mm (DIN lišta 35 mm)
Weight CR10 v2 – 150 g
CR10 v2 SL – 280 g
Antenna connector SMA – 50 Ohm
User interface ETH
USB
PORT1
PORT2
Ethernet (10/100 Mbit/s)
USB 2.0
On customer’s request
On customer’s request
Table 12: Technical parameters of router
7.2 Technical parameters of module
CDMA modul
CDMA parameters Rev. A: Bit rate 3,1 Mbps (DL) / 1,8 Mbps (UL)
Rev. B: Bit rate 14,7 Mbps (DL) / 5,4 Mbps (UL)
Backward compatible with Rev.0
Transmit power +23,0 dBm ∼ +30,0 dBm
Supported bands 450MHz (Sub band A,B,L)
800MHz & 1900MHz dual or single
Table 13: Technical parameters of module
26
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de