User Manual

Preliminary User manual
FCC ID: OSZ37200M-10 Page 3 of 10
0-Introduction
The Intersil ISL37200M WLAN miniPCI card is a complete wireless high speed Network Interface
Card (NIC) utilizing the Intersil PRISM® 3 Direct Sequence Spread Spectrum (DSSS) Wireless
Transceiver chip set.
It provides a complete PRISM 3 reference design evaluation platform of hardware and software to
system providers or integrators requiring wireless data communications capability and is ideal for
integration into computer platforms.
1- OEM Installation Procedure
1.1 Installing the miniPCI card into the host PC Notebook
a-open miniPCI slot cover of host PC Notebook housing
b-insert miniPCI card into miniPCI slot
c-connect the host PC notebook antennas to the miniPCI card antenna connectors (Hirose type UFL
connector)
d-close miniPCI slot cover of host PC Notebook housing
1.2 Installing the software drivers
a-Start windows
b-When windows detects new hardware and asks for drivers, point to directory where the Intersil driver
is located (for example floppy drive, cdrom , harddisk) to install.
c-after drivers are installed, restart windows
d-the Intersil WLAN icon will appear in system tray on the bottom right of the screen (see yellow
arrow in fig. 01)
fig, 01: Intersil WLAN icon