Installation Instructions

3M, Scotchgard and the plaid design are trademarks of 3M. FEATHER FINISH is a registered trademark of Ardex, Inc. PLANI-PATCH is a registered trademark of MAPEI. SHURTAPE
HP SERIES is a registered trademark of Shurtape Technologies. DUCK™ is a trademark of Henkel Consumer Adhesive Inc.
© 2017 Congoleum Corporation
Printed in USA
3500 Quakerbridge Road, PO Box 3127
Mercerville, NJ 08619-0127 • www.congoleum.com
Caution: DuraCeramic Origins, DuraCeramic Dimensions and Ovations,
like other types of hard-surfaced oors, can become slippery when wet.
Allow time for the oor to dry after washing. Immediately wipe up wet
areas from spills or wet feet. Place mats at outside entrances to prevent
water, snow or ice from being tracked onto your oor. Improper polishes or
nishes can also cause slipperiness.
REGULAR CARE
• Sweep or vacuum regularly to remove grit and sand that can abrade,
dull or scratch your new oor. Do not use a vacuum with a beater
brush, because it may damage the oor’s surface.
• Wipe up spills promptly with a damp cloth or mop.
• Wash the oor with Congoleum Bright ’N Easy No-Rinse Cleaner or
other suitable oor cleaner.
CAUTION: Avoid one-step “mop and polish” products, dishwashing liquids
and oil-based cleaners. These may leave a residue which can attract dirt
and dull the oor’s nish. Avoid cleaners that contain abrasives or solvents
which may permanently damage the oor.
• Do not use silicone sealers or penetrating sealers on the tile surface. A
copolymer or acrylic grout sealer compatible with acrylic grouts may be
used on the grout. Do not use a penetrating silicone sealer on the grout.
• Do not buff the oor. Do not apply polish to DuraCeramic or
DuraCeramic Dimensions. Floor Polish use is optional for Ovations.
65