User's Manual

3 of 6 13/11/30
2．FUNCTION DESCRIPTION
2.1 POWER ON/OFF
Pressing and holding [POWER] button for 3 seconds to turn on the radio, the LCD will indicate the default
band [USA] or [CAN] one second, then go to the default operating frequency [88.1MHZ] (see Fig 1) or last
operating frequency, pressing it for 3 seconds again will turn off the radio.
Note: When the transmitter is turned on, the display will show full display during the start up.
Fig 1
2.2 Frequency SETTING: The device built-in the USA & CAN operating frequency & power
level (see frequency list in Fig. 8), press the [UP] or [DOWN] button to choose the preset
operating frequency.
2.3 Choose the USA or CAN Band
(a) Hold press the [Monitor] & [Power] button 3 second to turn on the radio, the LCD
indicate the previous operating band (USA or CAN) flashing,
(b) Press the [MENU] button to the band select mode, the LCD stop flashing
(c) Press the [UP] or [DOWN] button to choose the USA or CAN band (the power level has
preset in radio by program software)
(d) Press the [MENU] button to store the setting & go to the default operating frequency for
a while.
2.4 Frequency Lock:
Pressing and holding the [DOWN] button for 5 seconds, the display will show “
“ icon (see
Fig 2), the transmitter will be locked out the operating frequency, it will go back to unlocked by
pressing and holding the [UP] or [DOWN] button for 5 seconds again. The lock option will remain
even if the unit is turned off and on again or is unplugged from the power source.