User's Manual

4 of 6 13/11/30
Fig 2
3. Menu Options:
Pressed and held the [MENU] button for 6 seconds, then the transmitter will enter into program
mode, there are “Stereo/Mono”, Test Tone, Exit, three function in setting menu.
After 10 seconds of inactivity the transmitter automatically will exit the program mode.
3.1 Stereo/ Mono
Enter into program mode second option will blink “Stereo”,
Press the [UP] or [DOWN] button to select the [Mono] or [Stereo].
•Press [MENU] button to save the selected value and to go to the next menu option.
The LCD display of Mono & Stereo (see Fig 3 & Fig 4).
Fig.3 Fig. 4
3.2 Exit
Fig 7
Enter into program mode fifth option will blink [EXIT]
•Press [MENU] button to exit the menu option.
4. RESET
Press and hold down [UP] + [DOWN] buttons, then Power On the transmitter, it will go back to the
initial program channel, the default frequency is [88.1MHZ].
NOTE! This function is very useful if the transmitter is malfunctioning or if you want cancel all made
settings. Reset shall restore the transmitter to default settings.