Instructions

25
The webinterface oft he LANTRONIX- webservers does not accept changes in
the configuration settings
Possible reason: Changes of the settings had been marked by the „OK“
button, however had not been flashed into the memory of
the device by choosing „Apply settings“.
or
Changes of the settings had been made correctly and are
operative („OK“ and final „Apply settings“) However, the
browser is showing the previous settings because of loa-
ding the website from its cache and not from the webser-
ver (LANTRONIX).
Remedy: Mark every changes in settings by pressing „OK“. Finaly
flash the whole set of parameters by pressing the „Apply
settings“ button. Please keep in mind that it is important
to list all changes in order to keep the ability of access to
the LANTRONIX webserver!
or
Update the website in the browser (load newly and avoid
to show the content of the cache).
The virtual com- port is showing strange and disturbing characters in com-
pany with a correct modem- communikation (at… ok)
Possible reason: Those characters are sent from the Telnet diagnostics
port.
Remedy: Switch off the Telnet- diagnostics (set from „enable“ to
„disable“).