Instructions

XPort Embedded Device Server
Minimal engineering effort required to web-enable
virtually any electronic device
Remote command and control of edge devices
Real-time edge device status via e-mail alerts
256-bit AES encryption for secure communications
EMC/EMI-compliant; RoHS-compliant
Everything you need – all in a single RJ45 package
Full Networking in a Tiny Package
XPort removes the complexity – of designing network
connectivity into a product by incorporating all of the
required hardware and software inside a single
embedded solution. Smaller than your thumb, it includes
all essential networking features, including a 10Base-
T/100Base-TX Ethernet connection, proven operating
system, an embedded web server, e-mail alerts, a full
TCP/IP protocol stack, and 256-bit AES encryption for
secure communications. This easy-to-embed networking
processor module enables engineers to focus on their
core competency while reducing development time and
cost and increasing product value.
Integrated Network Communications Module
XPort is powered by our DSTni
™
network processor SoC,
which includes a 10/100 MAC/PHY and 256 KB of SRAM.
It features a built-in web server for communications with
a device via a standard Internet browser. Web capability
can be used for remote configuration, real-time
monitoring or troubleshooting. XPort has 512 KB of on-
module Flash for web pages and software upgrades.
It acts as a dedicated co-processor that optimizes
network activities permitting the host microprocessor
to function at maximum efficiency.
Building Intelligent Devices
With XPort you can embed intelligence into any
electronic product for applications such as:
• Remote diagnostics and upgrades
• Asset tracking and replenishment
• Automation and control
• Power management
• Remote collaboration
• Personalized content delivery
Robust, Feature-Rich Software Suite
Eliminating the need to negotiate the intricacies of
Transmission Control Protocol (TCP) or Internet Protocol
(IP), XPort incorporates:
• Robust Real Time Operating System (RTOS)
• Full-featured network protocol stack
• Proven, ready-to-use serial-to-wireless application
• Built-in web server for device communication and
configuration via a standard browser
The Windows-based DeviceInstaller
™
makes configuring
one or more XPorts in a subnet quick and easy.
• Install and configure XPort and load firmware
• Assign IP & other network specific addresses
• Set wireless parameters
• Load custom web pages and view specific
device data
• Enable web-based configuration of the device
• Ping or query the attached device(s) over
the network
• Allow Telnet communication with the device(s)
XPort
®
is a compact, integrated solution to web-enable
any device with serial capability. By incorporating
XPort to a product design, manufacturers can offer
network connectivity as a standard feature within
weeks — so they can be accessed and controlled
over the Internet.
Build Network Connectivity into Your Products,
Quickly and Simply
Embedded Device Server XPort