Instructions

4: Configuration Using Web Manager
DeviceLinx™ XPort/XChip SoC User Guide 33
Email Settings
The unit sends an email to multiple recipients when a specific trigger event occurs.
There are three separate triggers, based on any combination of the configurable pins
selected as user I/O functions. Optionally, use a two-byte serial string to initiate a
trigger. Each trigger is independent of the others. Each condition within an individual
trigger must be met before the unit will send the email.
To configure the XPort’s email settings:
1. On the main menu, select Email. The Email Settings window opens.
Figure 4-9. Email Settings
2. Configure the following fields:
Server IP Address
Enter the IP address of the mail server.
Server Port
Enter the port number on the email server.
Domain Name
Enter the email server’s domain name.
Unit Name
Enter the user name used by the XPort to send email
messages.
Recipients
Recipient 1: Email
Address
Enter the email address designated to receive email
notifications.
Recipient 2: Email
Address
Enter an additional email address designated to receive email
notifications.
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
Trigger Configuration
A trigger event occurs when the unit receives the specified trigger input resulting from
a specified combination of conditions on the configurable pins.