Technical Specifications

712-243-2430
8
1000 Series - Components
90” x 120” Float Section
90” x 120” x 10”
(228.6 cm x 304.8 cm x 25.4 cm)
FS1120
The primary component of the slip
t connection system.
45” x 60” Float Section
45” x 60” x 10”
(114.3 cm x 152.4 cm x 25.4 cm)
FS1060
The primary component of the slip
t connection system.
45” x 30” Float Section
45” x 30” x 10”
(114.3 cm x 76.2 cm x 25.4 cm)
FS1030
A smaller oat section that is half as big
as the FS1060, when a little more length
is needed.
Corner Float Section
44” x 33” x 10”
(111.8 cm x 83.8 cm x 25.4 cm)
CFS1010
Adds strength, stability and extra walking
space to the ngers of your dock.
Float Connector
7” x 6” x 9”
(17.78 cm x 15.24 cm x 22.86 cm)
FC1010
Slip ts into the Float Section sockets
to hold the sections together.
2” Pole Connector
10” x 6” x 10”
(25.4 cm x 15.24 cm x 25.4 cm)
PC1010
Slips into the outer sockets of the
dock and used for anchoring.
2” Pole Cover
41”
(104.14 cm)
PC1002
Improves appearance of
anchoring poles.
Cleat
7” x 1.35”
(17.78 cm x 3.43 cm)
8C1020
Keeps your watercraft tied
near the dock.
Extra Flotation
29.5” x 14” x 9.5”
(74.9 cm x 35.5 cm x 24.1 cm)
EF1010
Slips under dock to provide
extra otation where needed.
Accessory Connector
3.5” x 6” x 9”
(8.89 cm x 15.24 cm x 22.86 cm)
AC1000
Accessories can be attached to this
handy connector.
Finishing Connector
3.5” x 6” x 9”
(8.89 cm x 15.24 cm x 22.86 cm)
FC1000
Fill the outer connector sockets of
your dock for a nished look.