Service manual

23
Ensure electrical power to oven is off.
Disconnect all wire connections from Control Head Board. (Always pull from
metal terminal not wire. Pulling on wire can cause damage to wire or
terminal).
To release Control Head Board, use pliers to squeeze the top of (4) locking tabs,
see (Fig. 5).
Carefully lift Control Head Board to release and remove from oven, see (Fig. 4).
1.
2.
3.
4.
Press tabs together to
release lock
Removing the ERC
Fig. 4
Fig. 5
Turn off electrical power to oven before servicing.
WARNING :
CAUTION :
Always touch a metal structure to ground yourself before
handling any electrical compnents