Service manual

26
Disconnect all wire connections from
Power Board. (Always pull from
metal terminal not wire. Pulling on
wire can damage wire or terminal).
Remove (1) screw from side of Power
Board, see (Fig. 7).
Gently push Power Board to release
tabs from bottom of Electrical
Enclosure Base, see (Fig. 8).
Remove Power Board from oven, see
(Fig. 9).
1.
2.
3.
4.
Turn off electrical power to oven before servicing.
WARNING :
CAUTION :
Always touch a metal structure to ground yourself before
handling any electrical components
Removing the Power Board
Fig. 7
Fig. 8
Fig. 9
Power Board Tabs
Slide Power Board to right side of unit
Remove (1) screw