Service manual

30
Secure with pliers to ensure standoff legs do not turn while
removing screws
Ensure electrical power to oven has been shut off.
Disconnect all wire connections from Power Supply. (Always pull from
connector not wires. Pulling on wire can damage wire or connector.)
Using pliers hold hex stand off legs to prevent from turning.
Remove (4) Phillips screws from corners of power supply, see (Fig. 12).
Remove power supply from oven.
1.
2.
3.
4.
5.
Removing Power Supply
Fig. 12
Turn off electrical power to oven before servicing.
WARNING :
CAUTION :
Always touch a metal structure to ground yourself before
handling any electrical compnents