Service manual

54
Removing Damper Motor
Turn off electrical power to oven before servicing.
WARNING :
CAUTION :
Sheet metal parts could have sharp edges and corners.
Disconnect all wires from Damper
Motor. (NOTE: Always pull from
connectors, not the wires. Pulling
on the wires can cause damage
to wires and terminal.)
Remove (2) screws from damper
motor bracket as shown in (Fig. 4).
Pull damper motor away from duct
as shown in (Fig. 5).
Remove damper motor from oven.
1.
2.
3.
4.
Fig. 4
Fig. 5