Service manual

61
Removing Convection Motor
Remove (3) screws as shown
in (Fig. 19).
NOTE: These screws
are the Convection Motors only
support caution is required when
removing the last screw to prevent
motor from falling from rear of unit.
Remove the wires from Convection
Fan Motor as shown in (Fig. 20).
Remove Convection Fan Motor from
unit and set aside (Fig. 21).
1.
2.
3.
Fig. 19
Fig. 20
Fig. 21
Turn off electrical power to oven before servicing.
WARNING :
CAUTION :
Sheet metal parts could have sharp edges and corners.