Service manual

68
Remove (4) screws from each vent trim as shown in (Fig. 28) and (Fig. 29).
Remove (1) screw from gasket retainer as shown in (Fig. 30).
Remove door gasket from front frame. Gently pull gasket at clip mounting points
to release from front frame, see (Fig. 30). (NOTE: Do not pull quickly, doing so
could rip clips from gasket causing damage to part. )
1.
2.
3.
Fig. 29
Fig. 28
Top vent trim removal
Middle vent trim removal
Fig. 30
Removing Vent Trim & Door Gasket
Remove (1) screw from
Gasket Retainer
Turn off electrical power to oven before servicing.
WARNING :
CAUTION :
Sheet metal parts could have sharp edges and corners.